How does a p0507 trouble code work on a Nissan?

How does a p0507 trouble code work on a Nissan?

Over time, carbon builds up on the throttle plate and in the throat of the throttle body, the ECM adjusts throttle plate opening to compensate for the buildup. At a certain point, the ECM can no longer compensate and sets a P0507 trouble code.

When is the p0507 idle air control system higher than expected?

In this case, the P0507 DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is greater than the desired (pre-programmed) RPM.

What to do when ECM says p0507 trouble code?

At a certain point, the ECM can no longer compensate and sets a P0507 trouble code. You must remove the electronic throttle body to clean it. Apply throttle body cleaner to a clean rag and wipe the carbon off the throat and throttle plate.

What is the trouble code for a p0301 cylinder?

P0118 CTS, P0507 ERGvalve, P0301 misfire #1. Hi, Replaced CTS, ERG, cleaned throttle body, ck for vacuum leaks. When I start (cold or hot) immediately revs to 2000 rpm, in 10 sec will gradually come down to 1200rpm & stay there. throttle is fully closed and …

What does the p0507 code on the ECM mean?

What Does P0507 Mean? The P0507 code is triggered when the Engine Control Module ( ECM) detects that the engine is idling higher than the specified idle rpm range. The standard engine idle is usually between 600-800rpm based on the model of the vehicle.

How much does it cost to fix error code p0507?

Estimated Cost of Repair. For error code P0507, one or more of the below repairs may be needed to solve the underlying issue. For each possible repair, the estimated cost of repair includes the cost of the relevant parts and the cost of labor required to make the repair. Clean Throttle Body $150-$250 labor $20-$40 in parts

Over time, carbon builds up on the throttle plate and in the throat of the throttle body, the ECM adjusts throttle plate opening to compensate for the buildup. At a certain point, the ECM can no longer compensate and sets a P0507 trouble code.

What Does P0507 Mean? The P0507 code is triggered when the Engine Control Module ( ECM) detects that the engine is idling higher than the specified idle rpm range. The standard engine idle is usually between 600-800rpm based on the model of the vehicle.

Estimated Cost of Repair. For error code P0507, one or more of the below repairs may be needed to solve the underlying issue. For each possible repair, the estimated cost of repair includes the cost of the relevant parts and the cost of labor required to make the repair. Clean Throttle Body $150-$250 labor $20-$40 in parts

What causes idle RPM on Nissan Altima p0507?

It would be a good idea to start by looking for a vacuum leak and move forward from there. A leaking vacuum system will often cause the Altima to idle higher. When the vacuum system leaks, it allows extra air to enter into the combustion chamber. This air allows for a slightly higher combustion, increases the RPM and throws the code.

What causes idle air control code on Nissan Altima?

While the code specifically mentions the “Idle Air Control System”, it would be a mistake to just go ahead and replace it without a little due diligence. The Idle Air Control Valve is often not the cause of the code. Here are some of the most common causes of P0507 in the Nissan Altima, as well as waist to troubleshoot them.

How much does it cost to repair Nissan p0507 code?

The cost to diagnose the P0507 NISSAN code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

What causes a p0507 on a Nissan Altima?

Here are some of the most common causes of P0507 in the Nissan Altima, as well as waist to troubleshoot them. Keep in mind that there are differences in model years. It would be a good idea to start by looking for a vacuum leak and move forward from there.

What does idle air control code p0507 mean?

It is typically triggered when the engine idle speed is 200 rpm or more over the predetermined limit set by the manufacturer. It is a generic code, which means that it has the same for the Nissan Altima as any other vehicle. Unlike many OBDII trouble codes, P0507 will typically be noticeable to you when driving.

While the code specifically mentions the “Idle Air Control System”, it would be a mistake to just go ahead and replace it without a little due diligence. The Idle Air Control Valve is often not the cause of the code. Here are some of the most common causes of P0507 in the Nissan Altima, as well as waist to troubleshoot them.