How to diagnose a Nissan Altima self-diagnosis?
CONSULT-III Function CONSULT-III APPLICATION ITEMS CONSULT-III can display each diagnosis item using the diagnosis test modes shown following. DATA MONITOR Display Item List …
How to diagnose a Nissan Altima blower problem?
Go to Mode Door Motor Circuit. Refer to HAC-32, “Diagnosis Procedure”. • Discharge air temperature does not change. Go to Air Mix Door Motor Circuit. Refer to HAC-35, “Diagnosis Procedure”. • Intake door does not change. Go to Intake Door Motor Circuit. Refer to HAC-38, “Diagnosis Procedure”. • Blower motor operation is malfunctioning.
How does the Nissan Altima headlamp system work?
System Diagram System Description The headlamp system for Canada vehicles is equipped with a daytime light control unit that activates the high beam headlamps at approximately half illumination whenever the engine is running. If the parking brake is applied before the engine is started the …
How to check the temperature of a Nissan Altima?
Press (DEF) switch for the second time. Temperature detected by in-vehicle sensor is indicated on the display. NOTE: If the temperature indicated on the display greatly differs from the actual temperature, check sensor circuit first, and then check sensor. Is the inspection result normal?
How to set Nissan Altima in self diagnosis mode?
Shifting from one step is accomplished by means of turning temperature control dial (LH side), as required. Shifting from STEP-5 to AUXILIARY MECHANISM is accomplished by turning the LH temperature control dial clockwise or counterclockwise. 1. Press ignition switch ON. 2. Set in self-diagnosis mode as follows.
How to clear engine OBDII Codes without Nissan consult?
ECM has entered to Diagnostic Test Mode II (Self-diagnostic results). How to clear the engine codes without a Nissan CONSULT or scan tool. Set ECM in Diagnostic Test Mode II (Self-diagnostic results). Fully depress the accelerator pedal and keep it for more than 10 seconds.
System Diagram System Description The headlamp system for Canada vehicles is equipped with a daytime light control unit that activates the high beam headlamps at approximately half illumination whenever the engine is running. If the parking brake is applied before the engine is started the
Press (DEF) switch for the second time. Temperature detected by in-vehicle sensor is indicated on the display. NOTE: If the temperature indicated on the display greatly differs from the actual temperature, check sensor circuit first, and then check sensor. Is the inspection result normal?