What engine does the 1989 240SX have?
1989 and 1990 models are powered by a naturally aspirated 140 hp (100 kW), 152 lb⋅ft (206 N⋅m) 2,389 cc (2.4 L; 145.8 cu in) SOHC KA24E engine with 3 valves per cylinder (instead of the turbo-charged and intercooled 1.8-liter DOHC CA18DET offered in Japan and Europe in the 180SX and Silvia).
What engine is in the s14?
Nissan 200SX/Silvia S14 performance and specs
| Model | Nissan 200SX |
|---|---|
| Engine | 1998cc 16 valve, turbocharged DOHC inline four-cylinder |
| Power | 197bhp @ 6400rpm |
| Torque | 195lb ft @ 4800rpm |
| Transmission | Five-speed manual/four-speed auto |
What kind of engine does a Nissan 240SX have?
KA24DE Engine in an S14 240SX The 2.4 L (2,389 cc) KA24DE was used in many Nissan cars and trucks. Most KA24DEs bound for the US were built in the city of Aguascalientes, Mexico , with the exceptions of the 240SX, 1994-97 Altima (re-badged Bluebird SSS), and the U13 Bluebird released in Australia with FWD configuration, which were manufactured …
How much horsepower does a Nissan KA24E have?
The compression ratio is 8.6:1 or 9.1:1 for early 1989 Nissan 240SX. The Nissan KA24E engine produced 143 PS (105 kW; 140 HP) at 5,600 rpm of horsepower and 206 Nm (21.0 kg·m; 152.0 ft·lb) at 4,400 rpm of torque.
What’s the difference between a Nissan 240SX and a Silvia?
These engines are the primary difference between the North American 240SX and the world-market Silvia/180SX/200SX. The KA24DE did not come turbocharged while the SR20DET did. The U.S. version was regarded as a highly capable sports car that only needed a better engine.
How did the Nissan 240SX change over time?
The wheelbase car grew 2 in (51 mm) and the track width was also increased, while the overall length of the vehicle was slightly shorter than the previous generation. The curb weight of the vehicle increased by about 80 lb (36 kg) relative to the 1994 model. Dual air bags were added and the automatic seatbelts were replaced with common manual type.
The engine is equipped with Hitachi sequential electronic fuel injection system, ignition timing control system and EGR system. An 89 mm (3.5 in) cylinder bore and 96 mm (3.78 in) piston stroke give the motor a total of 2,389 cc of displacement. The compression ratio is 8.6:1 or 9.1:1 for early 1989 Nissan 240SX.
Where was the Nissan KA24DE engine made?
The 2,389 cc (2.4 L) KA24DE was used in many Nissan cars and trucks. Most KA24DEs bound for the US were built in the city of Aguascalientes, Mexico, with the exceptions of the 240SX, 1994-97 Altima (re-badged Bluebird SSS), and the U13 Bluebird released in Australia with FWD configuration, which were manufactured in Yokohama, Kanagawa, Japan.
What kind of compression ratio does a Nissan KA24E have?
The compression ratio is 8.6:1 or 9.1:1 for early 1989 Nissan 240SX. The Nissan KA24E engine produced 143 PS (105 kW; 140 HP) at 5,600 rpm of horsepower and 206 Nm (21.0 kg·m; 152.0 ft·lb) at 4,400 rpm of torque. The Nissan KA24E motor has a cast-iron cylinder block, cast steel connecting rods, a half-counterweighted forged steel crankshaft.
These engines are the primary difference between the North American 240SX and the world-market Silvia/180SX/200SX. The KA24DE did not come turbocharged while the SR20DET did. The U.S. version was regarded as a highly capable sports car that only needed a better engine.