Where is the EVAP canister on a Nissan Altima?

Where is the EVAP canister on a Nissan Altima?

EVAP Canister Purge Volume Control Solenoid Valve, EVAP Canister Vent Control Valve, Intake Valve Timing Control Solenoid Valve (VK35DE), VIAS Control Solenoid Valve (VK35DE) It is near the battery. Remove the fuse box cover by pushing the tab and lifting the cover up.

Is the solenoid valve on my Nissan P1800 faulty?

Faulty VIAS control solenoid valve VIAS control solenoid valve circuit harness is open or shorted VIAS control solenoid valve circuit poor electrical connection

What happens when the solenoid is off on a Nissan?

It responds to ON/OFF signals from the ECM. When the solenoid is off, the vacuum signal from the intake manifold is cut. When the ECM sends an ON signal the coil pulls the plunger downward and feeds the vacuum signal to the power valve actuator. An excessively low or high voltage signal is sent to ECM through the valve

What should I do if my Nissan Altima fuse is not working?

If a new fuse also opens, have the electrical system checked and repaired by a Nissan dealer or a repair facility of your choice. If any electrical equipment does not operate and fuses are in good condition, check the fusible links. Never use a fuse of a higher or lower amperage rating than that specified.

EVAP Canister Purge Volume Control Solenoid Valve, EVAP Canister Vent Control Valve, Intake Valve Timing Control Solenoid Valve (VK35DE), VIAS Control Solenoid Valve (VK35DE) It is near the battery. Remove the fuse box cover by pushing the tab and lifting the cover up.

Faulty VIAS control solenoid valve VIAS control solenoid valve circuit harness is open or shorted VIAS control solenoid valve circuit poor electrical connection

It responds to ON/OFF signals from the ECM. When the solenoid is off, the vacuum signal from the intake manifold is cut. When the ECM sends an ON signal the coil pulls the plunger downward and feeds the vacuum signal to the power valve actuator. An excessively low or high voltage signal is sent to ECM through the valve

If a new fuse also opens, have the electrical system checked and repaired by a Nissan dealer or a repair facility of your choice. If any electrical equipment does not operate and fuses are in good condition, check the fusible links. Never use a fuse of a higher or lower amperage rating than that specified.