Do you need to adjust the valve on a Nissan Versa?
Thanks! It probably needs a valve adjustment, but these (like many Nissan motors) use shim and bucket lifters, to bring the clearance back to spec you need to order the proper thickness shim. I’ve explored doing it since my 1.8 has 325 000KM on it, has sounded like a TDI at idle for a long time.
How to adjust # 3 intake valve exhaust valve?
Adjust #3 Intake Valve Exhaust Valve Adjustment: ENGINE OFF! You will notice that this is the same procedure and sequence as the intake valves listed above. Only now you are adjusting ONLY the exhaust valves the same way. with #1 cylinder Exhaust Valve at full valve lift …. Adjust #6 Exhaust Valve
How to remove camshaft valve clearance Nissan Sentra?
Refer to “ADJUSTMENT”. Perform adjustment depending on selected head thickness of valve lifter. Remove camshaft. Refer to EM-60, “Exploded View”. Remove valve lifters at the locations that are out of the standard. Measure the center thickness of the removed valve lifters using suitable tool (A).
How big is the intake valve on a Nissan VG33E?
The intake valve diameter is 42.0 mm (1.65 in), the exhaust valve diameter is 35.0 mm (1.38 in), the duration is 244° for the intake side and 240° for the exhaust side. Each valve used dual valve spring. The VG33E is equipped with two valves per cylinder with self-adjusting hydraulic lifters.
Thanks! It probably needs a valve adjustment, but these (like many Nissan motors) use shim and bucket lifters, to bring the clearance back to spec you need to order the proper thickness shim. I’ve explored doing it since my 1.8 has 325 000KM on it, has sounded like a TDI at idle for a long time.
Where to buy Nissan Versa parts and accessories?
When it comes to new Versa OEM parts at the lowest prices, we’ve been the top choice for decades. Our complete online catalog covers all Nissan genuine Versa parts and accessories. All parts are backed by the manufacturer’s warranty and shipped directly from Nissan dealers.
When to run compression test on Nissan Versa?
Once I go 45MPH or more the tire road noise and wind noise drowns out the sewing machine valve noise. when I drive the engine for an hour, all I hear is valves. at this point to really find out if there’s a problem, I would need to run a compression test on all cylinders.
What kind of engine does a Nissan Versa have?
Both engines were mated to a 4-speed automatic, a CVT and a 6-speed manual transmission. Then the second Nissan Versa made its debut at the 2011 New York Auto Show, it is equipped with a 1.6 L I4 engine that could produce 107 bhp and 107 pound feet of torque.
When it comes to new Versa OEM parts at the lowest prices, we’ve been the top choice for decades. Our complete online catalog covers all Nissan genuine Versa parts and accessories. All parts are backed by the manufacturer’s warranty and shipped directly from Nissan dealers.
When did the Nissan Versa come out in the US?
The first Nissan Versa was introduced in 2006 for the 2007 model year as the North American version Nissan Tiida hatchback, then since 2011, Nissan Versa becomes the American version Nissan Latio as a sedan, which is the successor of the Nissan Tiida; and since 2013 it also is a Nissan Versa Note for the U.S. market also as a hatchback.
What are the trim levels of the Nissan Versa?
S, S Plus, SV, SL and SR are available trim levels. 2.0 L I3 and 1.6 L I4 mated to 5-speed manual and CVT are available transmissions. Just like anything in this world, Nissan Versa could not withstand the natural beat no matter how tough it was built.
Are there hydraulic lifters on a Nissan Versa?
They’re not hydraulic lifters. Cams will wear the lifters down in a short time to the point that they will need it. Not only does it produce an audible noise when they’re out of adjustment but reduces power a bit since you aren’t getting full lift. They make a special tool that allows you to slip shims under the lifters. Click to expand…
What are the specs of a Nissan Versa?
Rear Wheel Size (inches) 15 X 6.5. Rear Wheel Material Steel. Rear Tire Size P195/65HR15. Spare Wheel Size (inches) Nissan Versa Specs for Other Model Years. 2019 Nissan Versa 4-door sedan
Are there any problems with the Nissan Versa?
According to Car Complaints, the 2009 Nissan Versa had 150 problems and 734 complaints – the most of all model years. Almost a third of them (49) related to the car’s suspension system, which also had 178 NHTSA complaints. Of these 49 problems, 45 were related to broken coil springs.
What’s the average mileage of a Nissan Versa?
The Versa’s broken coil spring problem earned a severity rating of “pretty bad.” Owners had to pay an average of $570 to have it fixed, and the average mileage when the problem occurred was 70,650 miles. The rest of the problems were a mixed bag. They ranged from hubcaps falling off to broken door handles to exhaust system failure and more.
Once I go 45MPH or more the tire road noise and wind noise drowns out the sewing machine valve noise. when I drive the engine for an hour, all I hear is valves. at this point to really find out if there’s a problem, I would need to run a compression test on all cylinders.