How to replace tail light bulb Jeep Liberty 2005-2007?
How to remove and replace tail light bulbs in a 2005 – 2007 Jeep Liberty. This is very easy to do and can be completed in a short amount of time. Buy your new tail light bulbs and then the only tool needed is a T20 Torx bit / screwdriver. Loading…
How to replace the bulb in a third brake light?
How to Replace the Bulb in a Third Brake Light Step 1. Locate your car’s third brake light housing, which may be accessed from the rear package shelf below the rear… Step 2. Remove the holding screws from the brake-light housing with a Philips screwdriver in a counterclockwise… Step 3. Pull the …
How do you change the light bulb in a car?
Pull the lamp housing straight out from the rear of the cab. Twist the bulb socket at the rear of the housing in a counterclockwise direction and pull it straight out of the housing. Pull the bulb from the socket and insert a new bulb. Replace the lamp housing in the reverse order.
How do you remove a brake light from a car?
Use a flat-blade screwdriver to pry the housing up to release the holding clips if there are no visible screws on your housing. Pull the third brake-light housing slightly away from its mounting surface. Rotate the light bulb socket in a counterclockwise direction and pull it straight from the housing. Pull the bulb from the socket and discard it.
How to change the brake light on a Jeep Liberty?
Brake light replacement. Needed: Sylvania 3157 bulb, 10mm socket, T-20 star bit. Wrench. I used a power wrench but a manual socket wrench works fine too. Takes 5 minutes. Same process works for changing amber light or tail light. This is a 2011 Jeep Liberty but the process is the same for 2008, 2009, 2010, 2011, and 2012 Jeep Liberty. Loading…
How do you change the tail lights on a car?
Once you have done this, you’ll need to access the tail lights through the trunk or rear hatch. It will be helpful to do this in a well-lit place, or you can grab a flashlight. There could be extra carpet or padding in the way of the access point. Move these away until you can easily see the back of the taillights.
Is it necessary to replace tail light bulbs?
Replacing tail light bulbs is critical, but it doesn’t have to be difficult. Responsibly owning and driving a vehicle requires maintenance and attention to detail. It is easy to forget about issues or put them off until a later date. You shouldn’t drive around too long without a tail light.