How do you remove a AC compressor from a Honda Civic?
- Step 1 – Evacuate the refrigerant. The refrigerant contains toxic chemicals that are harmful to people and the environment.
- Step 2 – Lift the car. The A/C compressor is accessible from underneath the right-front-end of the car.
- Step 3 – Remove the compressor.
- Step 4 – Remove the drier.
- Step 5 – Install the new compressor.
How do you remove an AC compressor from a car?
Step 5: Disconnect the pressure hoses from the compressor. Using a ratchet or wrench, disconnect the pressure hoses from the compressor. Plug them to prevent system contamination. Step 6: Remove the compressor mounting bolts. Using a ratchet or wrench, remove the compressor mounting bolts. Step 7: Remove the compressor from the vehicle.
What should I do before replacing my AC compressor?
Before starting the process, you should familiarize yourself with the air conditioning unit and the functions of its various parts. In addition, doing these things will make sure a smooth changing and re-installation process. Flush the condenser. This will remove debris from this component along with any contaminated compressor oil.
What happens if your air conditioner compressor fails?
If the compressor has failed, the A/C system will not work. A compressor that is seized may also contaminate the rest of the A/C system with metal debris. Step 1: Locate the A/C compressor. The A/C compressor will be located at the front of the engine with the rest of the belt-driven accessories.
What’s the easiest way to disable the a / C compressor?
If there is a seperate fuse or relay for the compressor, then you could remove either. There should be an electrical connector near the compressor that could be unplugged, or you could cut the belt if there is nothing else driven by that belt. Some cars (not Kia) can have a compressor bypass pulley installed & forget the compressor.
When to replace the a / C compressor in a Honda Accord?
The compressor can wear out and require replacement; this can take the average backyard mechanic about an hour to complete. Evacuate the A/C system with certified collection equipment by taking your Honda Accord to a garage or oil-change facility.
Where is the AC plug on a Honda Accord?
The owner’s manual will direct you to the location of the AC system in your Honda Accord. The low pressure plug, will have the letter L embossed on it, remove that plug and set aside for reinsertion. Figure 2. AC system under your hood. Then set the air conditioning to maximum power and lowest temperature possible. Figure 3.
How does the air conditioner in a Honda Accord work?
The Honda Accord uses an optional air-conditioning system to lower the temperature inside the car; the system has a condenser, evaporator and compressor that circulate Freon through a channeled blower fan. The compressor can wear out and require replacement; this can take the average backyard mechanic about an hour to complete.
How can I recharge my Honda Accord a / C system?
Turn the canister upside down and right side up while the refrigerant is going into the system. You should feel the canister getting extremely cold. Monitor the pressure gauge on the canister as you are filling the system, and when you get to the optimal psi, remove the hose, and check the vents inside the car for appropriate AC temperature.