Where is the blower motor on a Nissan Versa?
The blower motor used to be on the passenger side of the cabin filter box, and was fairly easy to remove, then Nissan decided to put the motor on the drivers side of the cabin filter box. As you can see from the video, it is almost impossible to remove the motor without removing some of the dash components.
Where is the relay for the blower motor?
The blower motor relay could be possibly bad. Relay is located at the fuse block on driver-side, remove plastic door on top of hood release latch. Switch relay with another relay and see if it works. Since my car manual did not show a way to test the resistor, I decided to replace the resistor and that fixed the problem.
Where is the fuse box on the Nissan Versa?
The manual says there is another fuse box on the passenger side…but I haven’t found it yet. There’s one on the drivers side, and there actually is a fuse in there for blower. That may be it. Check the fuse box located on the drivers side. As far as the passenger side, I haven’t seen a fuse box.
Why are the vents on my Nissan Versa not working?
When I turn my heat/ac on, nothing blows out of the vents. When I turn on the a/c, the compressor kicks on, but still, nothing coming out of the vents. Has anyone else had this happen?
The blower motor used to be on the passenger side of the cabin filter box, and was fairly easy to remove, then Nissan decided to put the motor on the drivers side of the cabin filter box. As you can see from the video, it is almost impossible to remove the motor without removing some of the dash components.
How do you repair a Nissan blower motor?
Use your hands to pull the connector´s wiring from its power source. Note the blower motor assembly behind the airbag harness — it is held in place with screws. Remove the blower motor assembly screws and pull the assembly out from the dashboard.
Can a Nissan blower fan be replaced without removing the dashboard?
The blower motor fan may need replacement. I will show you how you can replace your Nissan Blower Motor without removing the dashboard. Disclaimers: all opinions are my own, sponsors are acknowledged. Links in the description are typically affiliate links that let you help support the channel at no extra cost. Loading…
Where is the airbag harness on a Nissan blower?
Pinpoint the airbag harness connector in the space behind the glove box assembly. Use your hands to pull the connector´s wiring from its power source. Note the blower motor assembly behind the airbag harness — it is held in place with screws. Remove the blower motor assembly screws and pull the assembly out from the dashboard.