How to idle relearn procedure for Nissan Leaf?
Turn the key to OFF and wait at least 10-secs. Foot off the pedal, turn key to ON and 3-secs. Repeat the following procedure quickly FIVE times within 5 seconds. Pedal to the floor, then full release.
What’s the best way to idle a Nissan?
Release the accelerator pedal within 3 seconds after malfunction light stops blinking and turns ON steady. Start engine and let it idle. Then check idle speed and ignition timing. Engine at operating temp. Disconnect the MAF sensor harness connector. Restart the engine and let it idle for at least 5-secs.
When to release accelerator pedal for idle relearn?
Pedal to the floor, then full release. After the 5 pedal presses, wait 7 seconds and depress the accelerator pedal to the floor again and keep it there for approx. 20 seconds until the malfunction light stops blinking and turns ON steady. Release the accelerator pedal within 3 seconds after malfunction light stops blinking and turns ON steady.
Turn the key to OFF and wait at least 10-secs. Foot off the pedal, turn key to ON and 3-secs. Repeat the following procedure quickly FIVE times within 5 seconds. Pedal to the floor, then full release.
How to reset the ECM on an X Trail?
1) Sit in the driver’s seat. 2) Turn the ignition key to the ON position and wait three seconds. (Do not start the car.) 3) Fully depress and release the accelerator pedal five times in less than five seconds. 4) Wait exactly seven seconds. Fully depress the accelerator pedal for ten seconds until the MIL (SES) lightflashes.
Release the accelerator pedal within 3 seconds after malfunction light stops blinking and turns ON steady. Start engine and let it idle. Then check idle speed and ignition timing. Engine at operating temp. Disconnect the MAF sensor harness connector. Restart the engine and let it idle for at least 5-secs.
How do you program the Nissan Intelligent Key?
Immediately press any button on the Nissan Intelligent Key. This needs to be done quickly to be effective. Next, you’ll want to test out the Nissan Intelligent Key. Stand farther away from your Nissan and click the buttons on the Key. If the lights flash or the horn beeps once, your Nissan Intelligent Key programming was successful!