What makes a ticking noise at the top of the engine?
Noise increases wilh rpm hot or cold and is recognized at the top of the engine. VALVE TRAIN Lash adjusters can make a tickingltapping noise noticeable at any engine rpm/temperature and is audible through the wheel well or an open hood.
Are there any problems with the Nissan Titan?
Nissan never offered to cover the repairs for any of the reported incidents. The 2005 Nissan Titan also had many complaints. The drivetrain problems were still an issue, along with engine problems, unreliable brakes, and even suspension problems. The most common problem in the 2005 model year involved the failure of the rear axle.
Why does my Nissan make a weird noise?
WTF! this only came after i changed the wheels and tires….about 40km after installing them and im at 100km after the fact now with the same noise. It seems like its coming from the front right, its a droning sound kind of like the sound of rubber scraping against something, every half revolution of the wheel.
Why is my front tire making a rubbing noise?
The tread on the tire looks fine, I know it’s not scrubbing the wheel well, and it has brand new strut assemblies, including mounts, springs, and insulators, on the front end (the noise was there before replacing then with no change afterwards).
Why does my Nissan make so much noise?
The most common complaints are noise-related. Nissan, like many other manufacturers, makes use of the simple and effective tab-type sensor that will contact the rotor when the pads need to be replaced. The resulting, high-pitched squeaking noise has proven to be very effective in getting the driver’s attention.
What to do about noise in Nissan Murano?
One of the more simple methods of confirmation is to drive the vehicle at low speed and hit the brake abruptly; the noise will be evident as will the movement of the wheel to an observant assistant. The best course of action on the Murano is to replace the arm and bushing as an assembly.
What causes a vibration in the seat of a Nissan?
Tire condition has to be considered, especially if rotation service has been ignored; it’s not unusual for cupping to take place on the rear tires. Such uneven wear will often mimic a bad bearing, and will certainly cause a noticeable vibration through the seat.