When did the airbag reset work on my Nissan Maxima?
This worked on my 2002 I35.I don’t know if it’ll work on other similar model years or not. I am pretty sure it will NOT work on anything older than 2002, and it probably won’t work on anything newer than 2004. Again, it worked on my 2002, and that’s all I know.
How to reset the air bag warning light on a Nissan easy?
This is the procedure for resetting the air bag light for all Nissan’s. The vehicle in the video is a 2005 Nissan Xterra. 1. Turn key to the ON position. Wait until the airbag light turns off then immediately turn the key to the off position. 2. Wait 5 Seconds 3. Repeat Steps 1 and 2 two more times 4.
How to turn off the air bag light?
Wait until the airbag light turns off then immediately turn the key to the off position. 2. Wait 5 Seconds 3. Repeat Steps 1 and 2 two more times 4. Turn key on and wait until the air bag light starts to flash slowly 5. Wait 10 seconds 6. Turn off the car 7. Turns it back on and the air bag light should now longer be flashing.
What does a flashing air bag light mean?
The flashing means that there is a fault with the system. You can read the number of flashes and it will give you a code (codes listed below for ford ranger and Mazda B3000). If your code is not listed, just google the year, make and model of your car along with “airbag light code” (ex. 2001 Mazda B3000 airbag light code).
This worked on my 2002 I35.I don’t know if it’ll work on other similar model years or not. I am pretty sure it will NOT work on anything older than 2002, and it probably won’t work on anything newer than 2004. Again, it worked on my 2002, and that’s all I know.
How to reset the airbag status light on a Nissan?
Step 1 Insert the key into the ignition and turn the key to ON. Notice that the light will stay on and then start blinking. After turning the key to ON, wait until the light turns to off, to start the blinking process, and then switch the key OFF and remove the key. Wait 5 seconds. Stick the key back in the ignition and repeat step 1.
Why is the airbag status light not blinking?
If you have recently installed a new stereo or removed the seats in your Nissan, you may have noticed the airbag status light will not stop blinking. There is a simple fix for this that will keep you from having to take it to the dealer.
How to turn off air bag warning lights?
1. Turn ignition switch “ON”. 2. After “AIR BAG” warning lamp lights for 7 seconds, [i.e. when it stops running solid and starts flashing] turn ignition switch “OFF” within 1 second. [DO NOT SWITCH IT TO LOCK, SWITCH IT TO ACC] 3. Wait more than 3 seconds. 4. Repeat steps 1 to 3 two times. (Perform 3 times in total.) 5. Turn ignition switch “ON”.
If you have recently installed a new stereo or removed the seats in your Nissan, you may have noticed the airbag status light will not stop blinking. There is a simple fix for this that will keep you from having to take it to the dealer.
How can I Reset my airbag sensor light?
When plugging airbag sensor back in the airbag light on the gauge cluster in the dash started blinking. All you need to reset the airbag light on your Nissan, Infiniti or possibly other make of vehicle is a key. This should work on most vehicles, but will especially work on Nissans and Infiniti vehicles.
What to do if your airbag light has gone away?
Reset the airbag light and make sure that it disappeared from the dashboard. If it is still there – reread the codes and check for any trouble codes. Restart your car & test-drive. If the airbag light seems to have gone away from your dashboard – restart your ignition and go for a test drive.
When does the airbag light turn on without a scanner?
Some cars have a “passenger seat Airbag on/off button.” This is the first airbag light you should check when you want to remove the airbag light without a scanner. If the light is functioning well, it should turn on when someone occupies the passenger seat.
Step 1 Insert the key into the ignition and turn the key to ON. Notice that the light will stay on and then start blinking. After turning the key to ON, wait until the light turns to off, to start the blinking process, and then switch the key OFF and remove the key. Wait 5 seconds. Stick the key back in the ignition and repeat step 1.