How do I reset the required maintance light?
- Turn ignition switch to the ON position
- Trip Display to TRIP A mode
- Turn the ignition switch to the OFF position
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
How do I Turn Off the maintenance required light on my Honda?
How to Turn Off the Maintenance Required Light on a Honda Civic. Put the key in the ignition. Press and hold the odometer reset knob. This is the knob that sticks out on the bottom right of the instrument cluster. While holding this button, turn the key to the “On” position, but do not start the engine.
How do I reset maintenance light?
Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.
Turn ignition switch to the ON position
- Trip Display to TRIP A mode
- Turn the ignition switch to the OFF position
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
How do you reset the maintenance required light?
Turn of Maintenance Required Light. Here’s what to do: With the car off and key out, hold in the odometer select/reset button. Insert the key and turn to the run position without starting the car. Keep holding the button in. The Maintenance Required Light will blink once and then in another 5-10 seconds.
What does the maintenance required light in a Toyota mean?
Toyota’s “MAINTENANCE REQUIRED” light is a simplistic on-board computer system that alerts owners about specific maintenance needs so they can address the issue promptly and without hassle. At its most basic level, it keeps track of engine oil life so you don’t have to.