Why does my Nissan Nats not start my car?
As these cars get older the NATS system seems to start seeing small problems on the car as a detection of car theft, the system seems to store this false info and decide not to allow the car to start. My system seems to just reset the data each time you start the car. See these links for more info on why I decided to make this video.
How to turn on Nissan key fob Nats system?
Ensure all the doors have been unlocked, either by using a good transponder key or remote control key. Procedure 1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds. 2. Then turn ignition switch to OFF position. Leave key in ignition switch. 3. After 2seconds, the system will enter programming mode and will flash the warning
What do you need to know about Nissan anti-theft system?
Overview of the Nissan Anti-Theft System (NATS) This Website provides information needed for the purchase of key codes, immobilizer reset codes and the equipment needed to prepare the products needed to gain access to a vehicle and programming needed to facilitate the starting of the vehicle.
What does the Immobilizer pin on a Nissan mean?
Immobilizer PIN; what does this mean: Nissan and Infiniti vehicles utilize two codes when programming keys. The first code is the Pre-PIN which is obtained from the vehicle on NATS 5 and later systems. (Pre-NATS 5 vehicles do not use a Pre-PIN, only the unlock PIN.) The second code is the PIN code. This code is obtained from our website.
Ensure all the doors have been unlocked, either by using a good transponder key or remote control key. Procedure 1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds. 2. Then turn ignition switch to OFF position. Leave key in ignition switch. 3. After 2seconds, the system will enter programming mode and will flash the warning
Why does the Nats warning light keep coming on?
The nissan nats warning light keeps coming on after a couple minutes of driving? when you start the car it is not on. I have had it in the … read more
How does the Nats system work on a Nissan?
The NATS immobiliser controls signals to the Engine Control Module (ECM) which inhibit starting. On later systems there is also an input from the Audio system, which if disconnected inhibits the starting of the vehicle. NATS SECURITY INDICATOR Thesecurity LED is normally mounted in the dashboard area and indicates the status of the system.
How to troubleshoot a Nissan with no brake lights?
If no lights illuminate at all, the issue is with the fuse. Turn the vehicle off and replace the brake light circuit’s fuse. Nissan automobiles have two fuse boxes. One is located in the engine compartment and one in the passenger compartment. Open the hood and remove the engine compartment fuse box cover by pushing the tab and lifting it up.