Is there a dipstick in the transmission tube?
The service rep told me the cap was not meant to be removed by owners (only by Nissan service dept) and that there was NO DIPSTICK installed in the tube (the dealer has one). He stated that I should never have to worry about the transmission oil level — that it was good for “life”.
How to add fluid to a transmission check tube?
1 Place the funnel in the transmission check tube. The funnel will take the place of the dipstick. 2 Add the fluid in very small increments. It is important to add only a little bit at a time. 3 Recheck the level with the dipstick after each pour. This will allow you to see how much more you need, and keep you from overfilling. …
Where is the transmission dip stick on my Altima 2.5?
Nissan has completely ignored giving any information in the owners manual concerning the check (OR no check) of the CVT transmission on a 2013 Altima. My 2013 Altima 2.5 also just has a cap where the transmission dip stick should be — The cap looks like the cap on my daughters 2004 Murano.
Can a Nissan dealer refill the transmission dipstick?
Although it appears to be basically a drain – refill – drain – refill procedure, it will probably be best accomplished by a Nissan dealer. ($$) Hopefully the dealer will follow the critical steps, including proper temperatures etc. defined by the service manual. The fluid is largely affected by temperature.
Can a dipstick be used to check transmission fluid?
There is also no way for the consumer to add fluid if it is low. The days of periodically checking your transmission fluid level by pulling a metal dipstick from a tube alongside your engine are rapidly coming to a close.
When to use the dipstick tube on an engine?
The dipstick tube is most usually welded onto the engine block and it allows the dipstick to be emulsified by the engine oil at any given time. It is only used when the engine is cold at ambient temperatures above 0 degrees Celsius when the quantity of oil in your engine is most correctly shown.
1 Place the funnel in the transmission check tube. The funnel will take the place of the dipstick. 2 Add the fluid in very small increments. It is important to add only a little bit at a time. 3 Recheck the level with the dipstick after each pour. This will allow you to see how much more you need, and keep you from overfilling.
How many Universal transmission dipsticks are left in stock?
Only 9 left in stock – order soon. . Only 2 left in stock (more on the way). . Only 7 left in stock – order soon. . Only 19 left in stock – order soon.