How do you reset the oil light on a 2009 Honda Accord?
Turn the ignition to run (one position before starting engine). Press the SELECT/RESET button until the engine oil life indicator is displayed. Press the SELECT/RESET button for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.
How do I reset my oil light on my Honda Accord?
Turn the ignition to the “RUN” position. Do not start the engine. Press the “SELECT/RESET” stem until the Engine Oil Life is displayed. Press and old “SELECT/RESET” for 10 seconds, then release the stem.
How do you reset the oil light on a Honda Accord?
Close all doors. Gear to the park position. Turn the ignition On (before starting the engine). Continue to press the TRIP button until the OIL LIFE is displayed. While the OIL LIFE is displayed , press and hold the TRIP button until the OIL LIFE is flashing.
How to reset the service wrench on a Honda Accord?
Honda Accord 2008-2012 Oil Wrench Service Maintenance Light 1 Close all doors. Gear to the park position. 2 Turn the ignition On (before starting the engine). 3 Continue to press the TRIP button until the OIL LIFE is displayed. 4 While the OIL LIFE is displayed , press and hold the TRIP button until the OIL LIFE is flashing.
How do I reset the engine oil life?
If you change the oil in your Honda Accord, you will want to reset the Engine Oil Life and/or the “Main Reqd” light indicator. Just use these steps. Turn the ignition to the “ On ” position. Do not start the vehicle. Press the “ Select ” knob to toggle the setting to “ Engine Oil Life “.
How to reset A13 wrench / spanner maintenance reminder oil light?
Simple tutorial on how to reset the A13 wrench/spanner oil service maintenance reminder indicator light on Honda Accord from the year 2008-2009-2010-2011-2012. Close all doors. Gear to the park position. Turn the ignition On (before starting the engine). Continue to press the TRIP button until the OIL LIFE is displayed.
How to reset the oil light after an oil change?
How to reset change oil light? Locate your vehicle’s oil change reset button. Within your vehicle’s dashboard and around the gauge, locate a switch, button, or stick with a “reset” name. Change the odometer’s display mode to show total mileage. Press and hold the reset button, followed by turning the key. Confirm that you’ve reset the change oil light successfully.
Why did my engine light come on after an oil change?
If the light comes on after an oil change, the wrong level of oil might be the culprit. Just like the low oil level, an oil level too high could be the reason for an out-of-range oil pressure. If you are positive that you have used the fuel with the correct viscosity rating, check the level.
How do you turn off the change oil light?
Watch for the change oil light to flash. If it does not flash and remains on, turn the ignition key to the off position and then retry the procedure. After the change oil light flashes, it should go out. If the change oil remains on for five seconds (depending on the year and model Chevy), it may not have reset.
How do you reset oil life?
On all vehicles, the Engine Oil Life System can be reset as follows: 1. Turn the ignition to ON/RUN with the engine off. 2. Fully press the accelerator pedal slowly three times within five seconds. 3. Display the OIL LIFE REMAINING on the DIC. If the display shows 100%, the system is reset.