Where is the fuse located on a Nissan Pathfinder?
Got the 2015 service manual and had a look at that, looks like the 2014 service manual was a little incorrect. The location is now in the IPDM E/R (Intelligent Power Distribution module Engine room) this is a rectangular box under the hood/bonnet. On the Australian model it is located on the battery side.
Where is the fuse for the windshield washer pump?
Yes it is Item A in the drawings, drivers side. I have attached some pics of where it is on the Australian model, yours would be similar location on the left side. Mercina, thanks for your help… unfortunately, that doesn’t seem to be the correct fuse.
Where are the fuses on the ipdm washer motor?
The IPDM E/R box is a bit clumpy. When you un-clip it the, fuses are on the bottom of it with wires hanging off, you will see what I mean. However it is labelled on there (washer motor) so makes it easier to see you are getting the right fuse. So like I said, I pulled it out and yes wipers worked, washer didn’t.
What should I do if my washer pump is not working?
Access your car’s fuse box, find the fuse for your washer pump, and replace it if necessary. You may need to take your car to a professional mechanic or auto shop to fix wiring or electrical problems, especially if the washer is activated by a button on the car’s steering-column.
How to know if my windshield washer pump is faulty?
1 Try popping your vehicle’s hood if you have trouble hearing the pump. 2 If you hear your pump humming but you don’t see any fluid coming out from the nozzles, the fluid tank may be empty or there may be a clog. 3 If the pump doesn’t work at all, you’ll have to check the pump’s electrical system to see if the pump is faulty.
Where is the windshield washer pump located on a car?
In most cars, the windshield washer tank is located behind the front bumper, in front of one of the front wheels; see the illustration. How it works: When you operate the washer with the switch, it sends the signal to the control module (e.g. BCM) that, through the relay, operates the windshield washer pump.
What kind of power does a windshield washer pump use?
The control module supplies the 12 Volt power to the relay or directly to the pump (motor). If there is no power at the motor, the voltage must be checked at the connector at the control module.