What does it mean when Key system error?

A “Key System Error: See Owner’s Manual” warning indicates that there is an issue with the Intelligent Key system itself. You can continue to drive the vehicle if the warning appears while the engine is running, but it’s recommended that you visit your nearest authorized Nissan dealer to have your system checked.

What does the Key symbol mean in a nissan?

The flashing key — or sometimes a car outline with a key inside of it — is the security indicator light. This light flashes when the ignition switch is placed in the OFF, LOCK or ACC position. The blinking security indicator light indicates that the security system(s) equipped on the vehicle are operational.

What does the I key system error mean?

When I turned the car on and switched it to drive the i-key system error came on. The drive indicator showed the correct gear and the car ran fine. When I scanned the car, b2603 came up. If I drove b2602 also came up (I used BlueDriver bluetooth tool)

What does the flashing key sign on my…?

If the Nissan Vehicle Immobilizer System is malfunctioning, the light will remain on while the ignition switch is placed in the ON position. If the light remains on and/or the engine will not start, see a Nissan dealer for service as soon as possible. You should bring all registered keys that you have when visiting the Nissan dealer for service.

Why does my Nissan Serena have a key light?

The Nissan Anti-Theft System and the Nissan Vehicle Immobilizer System us this flashing key image to relay information to the driver about either the doors being unlocked or about the key itself. Fixing a concern with this light occasionally requires maintenance at a repair shop. The key sign on a Nissan Serena can be:

Why is my Nissan Altima saying I-Key System Error?

Hey guys, had a question and was wondering if anyone knew the solution. I have a 2014 Altima 2.5 S. When getting in last night the message “I-key system error” was on the dash display. The manual says go see a dealer but I wanted to know if I could fix the error myself.

When does a I-Key System Error code occur?

Reading the Factory manual states if the Key/car red light is blinking…. the system is good. During repair, when electronic components are disconnected…… it initiates an such system error code. Those codes of BCM need to be cleared…… first. Like some generous people posted on Youtube It is simple procedure.

Why does my smart entry light keep coming on?

First the code came up as the control access box as failing. Then it kept coming on after the fix. The changed key fobs, batteries, got a whole new car battery. Finally the latest fix has been replacing the start/stop button. This has finally taken care of the problem.

What happens if a key match is not detected?

If the computer finds a match, it will let you start the engine. If a key match is not detected, a few things can happen. The engine may start and run for a few seconds before dying or the engine may not even turn over at all. A warning light is included on the dash to let you know how the system is reacting.

What does it mean when key system error?

Why is my Hyundai Tucson not unlocking the door?

My 2017 Hyundai Tucson won’t unlock, is it a problem with the key or the car? It could be either the car or the remote-control unit at fault, and it’s impossible to tell without actually examining the vehicle. A remote-control unit with a battery that is low on voltage can cause all sorts of mysterious problems with a car’s central locking.

What to do if your Hyundai Tucson won’t start?

If the battery is dead, pressing the engine push start will not respond. In that case, hold the smart key over the push start button and then press the button to start the engine. This works for Hyundai Tucson built in 2013 and onwards.

What’s the problem with my 2016 Hyundai Tucson?

The vehicle was parked and locked with key fob then would not open. You have to climb through the passenger side and open from inside. Tl the contact owns a 2016 Hyundai Tucson. The contact stated that the driver’s side front door failed to unlock using the keyfob.

Why is the Hyundai push button not working?

The message boards are blowing up with folks who are being left stranded by the Hyundai push button start problem. The issue has to do with a failure in the brake pedal sensor. Ideally, a driver is supposed to put their foot on the brake and push the button.

When do the warning and indicator lights come on on a Hyundai Tucson?

Hyundai Tucson: Warning and Indicator lights. The SRS service reminder indicator (SRI) comes on for about 6 seconds after the ignition key is turned to the “ON” position or after the engine is started, after which it will go out. This light also comes on when the SRS is not working properly.

Are there any problems with the Hyundai Tucson?

Hyundai Tucson owners have reported 227 problems related to electrical system (under the electrical system category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Tucson based on all problems reported for the Tucson.

The actuator is the most likely component that is failing. The mechanism will not unlock the door with the key either. This is a huge safety issue when it’s 100 degrees outside and I can’t get a child out of the backseat. Or for first responders sent to aid someone trapped in the car.

Is the brake light on my Hyundai Tucson bad?

2017 Hyundai Tucson, alerts driver that the rear left brake bulb is bad. But when the lamp is removed the bulb looks dark but the inside leads aren’t broken. But the bulb socket looks like burned.

Navigation