How much does it cost to diagnose the p0345 Nissan code?
Labor: 1.0 The cost of diagnosing the P0345 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0345 NISSAN code detected?
What does a p0345 code mean on a crankshaft?
Rough running / misfiring A code P0345 could mean one or more of the following has happened: a wire or connector in the circuit could be grounded/shorted/broken the camshaft position sensor may have failed there exists an open circuit the crankshaft position sensor may have failed With a P0345 OBD-II trouble code, diagnosis can be tricky at times.
What to do if your camshaft position sensor says p0345?
Visually inspect the camshaft position sensor connector in search of corroded or broken connectors. Make any other repairs (if other codes are present) to make sure that other codes are not sources of the trouble code P0345. Check your camshaft position sensor’s voltage, ground, and signal readings with a multimeter.
How to fix the p0345 OBD-II trouble code?
Get a quote and book an appointment online or speak to a service advisor at 1-800-701-6230. No more waiting rooms! Our mechanics will come to you to diagnose and fix the P0345 code. How can we help? Our service team is available 7 days a week, Monday – Friday from 6 AM to 5 PM PST, Saturday – Sunday 7 AM – 4 PM PST.
What does the p0345 on a Nissan mean?
P0345 NISSAN Meaning The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection.
How much does it cost to repair a Nissan p0335?
The cost of diagnosing the P0335 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
How long does it take to diagnose a Ford p0345 code?
Sometimes and in some models, low battery voltage or a weak starter can trigger a Camshaft Position Sensor code. The cost to diagnose the P0345 FORD code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.
What causes a p0335 Nissan starter to malfunction?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. P0335 NISSAN Tech Notes Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code.
What does p0345 mean in an internal combustion engine?
What Does P0345 Mean? The camshaft position sensor located in the internal combustion engine monitors the position and rotational speed of the camshaft. It works hand in hand with the reluctor ring that creates a square wave voltage signal that the ECM interprets as the camshaft position.
What causes a Nissan camshaft sensor to malfunction?
P0345 NISSAN Possible Causes Faulty Camshaft Position Sensor Camshaft Position Sensor harness is open or shorted Camshaft Position Sensor circuit poor electrical connection Faulty starter motor Starting system circuit Dead (Weak) battery
What does the p0345 Nissan engine sensor mean?
P0345 NISSAN Meaning The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module to control ignition and fuel injection. The camshaft position sensor senses the retraction of camshaft (intake) to identify a particular cylinder.
Why is my Nissan p0345 stalling and cutting out?
Time cam sensor signal good but found a loose connection at cam position sensor causing the stalling problem. Customer Concern: Has a check engine light on and a Camshaft Position (CMP) sensor code P0340. Tests/Procedures: 1. Monitor the signal on the CMP sensor with a lab scope. The sensor should produce a 0-10 volt square wave pattern.
When do you need to repair code p0345?
It is extremely important to repair code P0345 as soon as possible. Replacing the camshaft position sensor without checking the wiring, connector, or reluctor ring beforehand.
P0345 NISSAN Possible Causes Faulty Camshaft Position Sensor Camshaft Position Sensor harness is open or shorted Camshaft Position Sensor circuit poor electrical connection Faulty starter motor Starting system circuit Dead (Weak) battery
Why is my Nissan camshaft sensor not working?
Since it says circuit, that means the problem could lie in any part of the circuit – the sensor itself, the wiring, or the PCM. Don’t just replace the CPS (camshaft position sensor) and think that will definitely fix it. With a P0345 Nissan OBD-II trouble code, diagnosis can be tricky at times.
What is the OBD code for Nissan p0200?
The currently selected ODB-ii codes is for the Nissan makes. 2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search. 3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use. 4.
Labor: 1.0 The cost of diagnosing the P0345 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0345 NISSAN code detected?
Visually inspect the camshaft position sensor connector in search of corroded or broken connectors. Make any other repairs (if other codes are present) to make sure that other codes are not sources of the trouble code P0345. Check your camshaft position sensor’s voltage, ground, and signal readings with a multimeter.
What causes a Nissan Altima to have code p0340?
Some common causes of code P0340 could include the following-. Damaged, burnt, shorted, disconnected, or corroded wiring and/or connectors. Defective camshaft position sensor. Use of substandard, aftermarket camshaft position sensor(s) Mechanical issues such as damaged or stretched timing chains, which is common on many Nissan applications.
What does p0340 stand for on a check engine light?
Just received the check engine light last night and tried erasing the memory, and the codes came back within a minute. According to the codes; P0340 is cam position sensor A Bank 1 and P0420 is Catalyst efficiency below threshold Bank 1. I figure I might be receiving the second code (P0420) becaus…
What does trouble code p0011 mean on a car?
The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0011 is set, it means that the intake camshaft in Bank 1 is more advanced than the ECM has told it to be.
What does the P0420 code on a Nissan mean?
Code P0420 indicates that the catalytic converter is not functioning efficiently, therefore increasing the output of harmful pollutants by your Nissan. Nissan P0420 Symptoms Check Engine Light is on Lack of power from the engine
How much does it cost to repair a Nissan p0011 code?
Please try again later. The cost of diagnosing the P0011 NISSAN code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
When does the ECM trigger the p0011 code?
When there is a gap between angle of target and phase-control angle degree, the valve will stop working and the ECM will trigger the P0011 code. P0011 NISSAN Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) Possible engine lack/loss of power Posssible engine rough idle P0011 Nissan Description