How do you turn off the airbag light on a Nissan Versa?
How to Reset The Airbag Status Light On A Nissan
- Insert the key into the ignition and turn the key to ON.
- Notice that the light will stay on and then start blinking.
- Wait 5 seconds.
- Wait 5 seconds and repeat step 1.
- When you are complete, you should have inserted the key and removed it for a total of 6 times.
What should I do if my airbag light keeps flashing?
Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy! – YouTube
Where is the button to turn off the airbag light?
This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars. This button is usually on the dashboard on the passenger side, and you may see it if you open the passenger door or the glove box.
Why does the airbag light come on when the battery is low?
The problem will be gone once the battery is fully recharged. However, the battery could still be on. You have to use a scan-tool and remove the soft-code error to switch it off. Low car battery could trigger the airbag light to turn on. The spring does the job of maintaining the continuity between the driver seat’s airbag and electrical wiring.
Is it possible to reset the airbag light without a scanner?
Luckily, in many car models, the airbag light will also go away by itself if you have repaired the problem. In some older cars, though, it is possible to reset the airbag light without a scanner by removing the car battery terminals.
Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy! – YouTube
Why is the airbag status light not blinking?
If you have recently installed a new stereo or removed the seats in your Nissan, you may have noticed the airbag status light will not stop blinking. There is a simple fix for this that will keep you from having to take it to the dealer.
This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars. This button is usually on the dashboard on the passenger side, and you may see it if you open the passenger door or the glove box.
How to reset the airbag status light on a Nissan?
Step 1 Insert the key into the ignition and turn the key to ON. Notice that the light will stay on and then start blinking. After turning the key to ON, wait until the light turns to off, to start the blinking process, and then switch the key OFF and remove the key. Wait 5 seconds. Stick the key back in the ignition and repeat step 1.