Why won t my car start when the security light is on?
The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine. If you get the same result as previously—nothing happens or the engine starts and dies with the security light flashing—wait ten more minutes.
Why is the anti security light not blinking?
Anti security light is on not blinking and car won’t star… replace starter and had battery tested good and now car won’t start’ red anti security light is on but not flashing My car has 173330 miles. My car has an automatic transmission. The anti-theft system is engaged. You will need to have the system scanned to see why the system is active.
When does the Nissan security indicator light blink?
The security indicator light blinks whenever the ignition switch is placed in the OFF, LOCK or ACC position. This function indicates the NISSAN Vehicle Immobilizer System is operational. If the NISSAN Vehicle Immobilizer System is malfunctioning, the light will remain on while the ignition switch is placed in…
What to do if your car security light is not working?
You can try to using a different key to see if it’ll work. Also, try to open the passenger door with the key to isolate the issue. This will help you find out if the driver’s door switch is causing the system to not deactivate or if the key is the problem.
Why is the oil pressure light not blinking?
The oil pressure light is blinking. Hi There, This light will usually come on when one of two things are happening. Either the motor is in fact low on oil or the oil pressure sending unit is not working properly and may be producing a faulty…
What to do when your security light wont turn on?
1.) Attempt to start the car by turning the key to the Start/Run Position. 2.) Observer that the vehicle fails to start and that the security light is illuminated. 3.) Release key to the ‘ON/Accessory’ Position. (DO NOT turn key to the ‘OFF’ position). 4.) Allow the vehicle to sit with the key in the ‘ON/Accessory’ Position for at least 11 minutes.
What to do if your PassLock light is not flashing?
Here’s how you do it: 1. Attempt to start the truck by turning the key to the Start/Run position. The passlock icon, a vehicle with a lock on it, on your dash may be flashing. Try to crank the vehicle. 2. Observe that the vehicle fails to start and the passlock security light is illuminated or flashing.
How to start a car with a flashing security light?
Attempt to start the car by turning the key to the Start/Run Position. 2.) Observer that the vehicle fails to start and that the security light is illuminated. 3.) Release key to the ‘ON/Accessory’ Position. (DO NOT turn key to the ‘OFF’ position).
Is it normal for the security light to go off when the engine is running?
After the learn procedure is completed and the engine is running, the security light may stay on steady for a few minutes and then go off—this is normal. Depending on the system, replacement of key components will necessitate that a relearn procedure be completed.