How do you reset the check engine light on a 2009 Nissan Murano?
How to Reset Nissan Murano ECU Check Engine Light:
- Turn the ignition key to position “ON” without starting the engine and wait 3 seconds.
- Fully press and release the accelerator pedal five times within 5 seconds.
- Wait 7 seconds.
- Fully depress the accelerator pedal all the way to the floor and hold for ten seconds.
How do you turn off the check engine light on a Nissan Murano?
How to Turn Off a Check Engine Light on a Nissan
- Open the driver’s side door and get into the drivers seat.
- Insert the key into the ignition and turn it a quarter turn so the ignition turns on, but the engine doesn’t start.
- Step on the gas pedal and quickly release it.
- Wait 10 seconds.
How to reset a service engine soon warning light on a Murano?
Unplug the scanner from the DLC. Start the engine of the Murano to ensure the “Service engine soon” light is out. You should only reset the “Service engine soon” light once the scanner has determined what the DTC is and the repair has been taken care of.
What is the OBD code for a Nissan check engine light?
Refer to our Generic OBD II code listfor definitions on all other Nissan diagnostic trouble codes. Manufacturer Specific Codes P1105MAP/BARO Pressure Switch Solenoid Valve P1110Intake Valve Timing Control Solenoid
When did the Nissan Murano get OBD II?
Introduced in late 2002 as a 2003 model, the Nissan Murano has always integrated on-board diagnostics II (OBD II). OBD II has been placed on all passenger vehicles and trucks since 1996.
Where is the DLC plug on a Murano?
Open the driver’s side door of the Murano and look under the dashboard on the left-hand side of the steering wheel (although certain year models may require looking on the right-hand side of the steering wheel). Locate the trapezoidal-shaped data link connector (DLC). The connector’s shape will match the female plug of the OBD II scanner.
Unplug the scanner from the DLC. Start the engine of the Murano to ensure the “Service engine soon” light is out. You should only reset the “Service engine soon” light once the scanner has determined what the DTC is and the repair has been taken care of.
Refer to our Generic OBD II code listfor definitions on all other Nissan diagnostic trouble codes. Manufacturer Specific Codes P1105MAP/BARO Pressure Switch Solenoid Valve P1110Intake Valve Timing Control Solenoid
Introduced in late 2002 as a 2003 model, the Nissan Murano has always integrated on-board diagnostics II (OBD II). OBD II has been placed on all passenger vehicles and trucks since 1996.
How to reset service engine soon warning light on an OBD II?
Because it’s trapezoidal-shaped, you can only insert the plug one way. The battery in the Murano will provide power to most all OBD II scanners, but refer to the manual for a “Power” or “On” button. Turn the ignition key to the Murano two clicks forward to the accessory power position.