What to do if your Nissan Almera is not starting?
Check that the spark plugs, injectors, collector and throttle body valve are all working properly. If the problem persists, change the battery of the key, close the doors and open them, and only then start the engine. Lastly, it might be the fuel pump that is failing, the top dead centre sensor or even the oxygen sensor.
What’s the engine code on a Nissan Almera?
Engine on tickover Idles at 1500 revs: driving , engine hunts between gear changes at 1800 to 2500 rpm Got nats codes 1610 & 1612 engine cranks but no start no spark at plugs. Nats light on dash continuously flashes.
Why does my Almera 1.6 equation not start?
My Almera 1.6 equation has been a really good runner so far but it is becoming quite unpredictable. It won’t start at all. The battery is fully charged, the starter motor doesn’t kick in. Sometime the car would start again after few hours and then it just didn’t start again once the problem happened.
Are there any problems with my Nissan Almera?
My Nissan Almera 1.8 2005 starts normaly and after 25-30 km the engine stops working and can not be started 1-2 minutes, after starting, the problem repeats in shorter period. The check indicator is turned on. I have made computer diagnostic and it shows 3 errors:
What to do if your Almera engine is failing?
Check the crankshaft sensor and scan your vehicle to see the codes provided. If it is the alarm that is failing, that occurred to me and the whole alarm system needed to be disconnected. After doing so, the car never failed again. Thanks for all your comments.
What to do if your Nissan Almera stalls?
The vehicle occasionally stalls and starts without a problem. But there are some other occasions, which have been more frequent lately, in which the engine does not start working again after it stalls. You need to change both the crankshaft and camshaft sensors and then reset your computer.
Engine on tickover Idles at 1500 revs: driving , engine hunts between gear changes at 1800 to 2500 rpm Got nats codes 1610 & 1612 engine cranks but no start no spark at plugs. Nats light on dash continuously flashes.