Where is the OBD port on a Nissan Micra?
OBD connector location for Nissan Micra (2010 – 2017)
- Connector is under the steering wheel.
- Remove the plastic cover to access to fuses and OBD Connector.
- OBD Connector.
Where are the diagnostic connectors on a Nissan Diesel?
Nissan Diesel – Please select the connector for your vehicle from the options below. Locations: Under the drivers side dash panel. In or next to the fusebox under the dash panel. Note: You may need the OBD2 / EOBD or UniPlug vehicle specific software.
Where do I find the trouble code on my Nissan?
On all models, to erase DTCs using generic scan tool (GST), select mode 4. Place diagnostic switch in the Off position. Place ignition switch in the On position. Crank engine. Start and operate engine. The trouble codes will be displayed by the flashing Engine Control Lamp and the Overheat Warning Lamp and the Overheat Warning Buzzer.
How to turn diagnostic mode on Nissan OBD?
Turn the diagnostic mode selector on the ECU fully clockwise and wait more than two seconds then turn the selector fully counterclockwise. The ECCS system is now in mode 2. Turn the diagnostic mode selector on the ECU fully clockwise and wait more than two seconds then turn the selector fully counterclockwise.
What is the diagnostic mode of a Nissan inspection lamp?
Mode IV (Switches on/off diagnosis): during this mode, the inspection lamps monitor switch on/off condition of the throttle valve switch, starter switch and vehicle speed sensor. Mode V (Real time diagnosis): if a malfunction is present during a driving test, the inspection lamps will display the malfunction condition immediately.
Nissan Diesel – Please select the connector for your vehicle from the options below. Locations: Under the drivers side dash panel. In or next to the fusebox under the dash panel. Note: You may need the OBD2 / EOBD or UniPlug vehicle specific software.
What does a diagnostic code on a Nissan mean?
A diagnostic code is helpful when troubleshooting a particular problem that has occurred. After the trouble code is defined the problem can be repaired and rechecked. Early Nissan check engine lights are not used to blink out a trouble code like on most vehicles but instead use a mode and retrieval method.
How to clear engine codes without a Nissan consult or scan tool?
How to clear the engine codes without a Nissan CONSULT or scan tool. Set ECM in Diagnostic Test Mode II (Self-diagnostic results). Fully depress the accelerator pedal and keep it for more than 10 seconds. The emission-related diagnostic information has been erased from the backup memory in the ECM.
Where can I find the Nissan check engine light code?
P1492 EVAP Canister Purge Control/Solenoid Valve (Circuit) – Read Our Article On Automotive Circuit Testing For Help With This Nissan Check Engine Light Code P1705 Throttle Position Sensor Circuit A/T – Read Our Article On Automotive Circuit Testing For Help With This Nissan Check Engine Light Code