Why does my Nissan Pulsar stall after starting?

Why does my Nissan Pulsar stall after starting?

Starting the car, it would start, then die. Only way to get it to start is to apply a little accelerator. After a few seconds, remove acceleration and car would idle, poorly (probably around 500rpm +/-). If I accelerate (1-2k rpm), and release foot, rpm would drop right down <500rpm, almost stalling, then it would pop back up again.

Why does my car stall when I start the engine?

The engine had too much air and not enough getting fuel is common cause the engine stalling. To start the cold engine, it requires enough a rich fuel mixture and while the engine warms up it will idle smoothly when enough fuel supply. Below is the might caused the engine stalling problem occurs:

What causes an engine to stall at a traffic light?

Problem: On Idle And Stop On Traffic Light The Engine Started Stall. When the engine isn’t fast enough (too low idle speed) it can caused the engine stalls (idle stall or stop light idle), or the alternator and/or the air conditioning compressor make engine being lugged down by a load on it.

Why does my car idle rough when at a stop?

Hello. Typically, if this vehicle runs fine at all other times and will have trouble idling when coming to a stop, it is almost always caused by a bad idle control valve. Most of the time the valve fails making it impossible for the computer to adjust the idle to the correct level.

Why does my Nissan Pulsar stall at low rpm?

Changed battery in mums 03′ Auto Nissan Pulsar (N16, QG18DE) sedan. After that, engine ran rough, low idle (600rpm +/-), and often would stall on startup (had to apply a bit of accelerator to not stall). When accelerating/decelerating (in park/neutral), RPM would go up as usually, but then drop right down to almost stall, then settle at low rpm.

What does it mean when your car is stalling at idle?

Problems with idle speed —things like slow idle, fast idle, rough idle, or stalling after idling for a few seconds—are symptoms that something is wrong with your engine. These should be investigated, diagnosed, and repaired as soon as possible.

When does a car have a rough idle?

November 27, 2017. It’s easy to tell when your car has a rough idle: When you start the engine, it won’t run at a steady rate. It may almost stall, or it may run at varying RPMs without your putting your foot on the gas, or it may do both.

What should the RPM be on an idling car?

When you start your engine, and just let it run without pressing on the accelerator or putting it into gear, that’s idling. A properly idling engine should be able to maintain a steady but low rate of revolutions, somewhere in the vicinity of 1,000 RPM.