How much does it cost to replace drive belt on Nissan Pathfinder?

Upfront and transparent pricing. Nissan Pathfinder Serpentine/Drive Belt Replacement costs $139 on average. What is a serpentine belt and how does it work? A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley.

How do you remove a serpentine belt from a car?

Pull the belt off of the pulleys. With the tension relieved from the belt, pull it off of the pulley that has been placing tension on it, then remove it from the around the rest of the pulleys on the engine. If the belt is severely damaged, be sure to remove any parts that may have come off of it as well.

How do you remove a belt from a Nissan Frontier?

Near the top of the idler pulley, you will see an adjustment bolt. Loosen the locking bolt in the center of the pulley to allow the pulley to move. Then, turn the adjusting bolt counterclockwise to loosen the tension on the belt. Remove the belt when you have relieved sufficient tension to slip it off the power steering pump pulley.

Where do I find the serpentine belt routing diagram?

Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.

What to do if your serpentine belt is worn?

A worn or damaged serpentine belt can fail to adequately transfer the power, leaving your alternator, power steering, and air conditioning failing to function. If your serpentine belt needs to be replaced, it can be done using only common hand tools. Pull the hood release inside the cabin of the vehicle.

How to install a belt in a 1998 Nissan Frontier?

Pull off the air conditioning compressor belt next. Position yourself underneath the vehicle. As you look up, you will see the large crank pulley, and just to the driver’s side of that, you will see another idler pulley. Follow the procedure from Step 2 to relieve tension then remove the air conditioner compressor belt.

When to replace the serpentine belt on a Land Rover?

The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump. Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles.

How to replace the serpentine belt on a 2005-2016 Nissan?

Brian Eslick from How to Automotive http://www.howtoautomotive.com takes you step-by-step through the process of Replacing the serpentine belt on a 2005-2016 Nissan Xterra/Frontier with the 4.0L engine. Estimated repair time is .50 of a hour. You will need a 3/8 ratchet, 10 mm socket and a new belt. Check links below.

How do you tighten a serpentine belt on a car?

If your vehicle does not have an auto tensioner, insert a pry bar or piece of wood between the alternator and the engine. Run the belt over the alternator pulley, then use the bar to pry the alternator away from the engine and increase the tension on the belt. Tighten the bolts again as you apply tension.

How do you change a serpentine belt on a car?

Belt tensioners are mostly spring tension. Once installed, the spring retains pressure to the belt. Once on, make sure the belt is completely on and centered on each pulley very carefully. Then, start the engine. Let the engine idle for at least 60 seconds as you make sure the serpentine belt is working correctly.

When to change serpentine belt on Nissan Rogue?

Serpentine belt change @ 30,000 is absolutely unnecessary, 60k maybe but still it’s also time based according to Gates. I just did it to my Rogue, first belt change at 121,000 miles and it was time but looked decent for all those miles.

When did I replace the serpentine belt on my Nissan Frontier?

I replaced mine at 90,295 miles in 2013. I bought it from Amazon for $25. Just changed my the OEM belt on my ’10 4.0L at 60k miles. It was starting to chirp on damp mornings, I used a Continental belt from Rock Auto. Side note, Easiest serpentine I’ve ever changed! Everything seemed to roll nicely when I had the belt off, no odd noises.

How to replace serpentine belts and idler pulleys?

The alternator/PS pulley has a slightly wider surface area and the A/C pulley is skinnier. Now it’s time to install the new idler pulleys, new belts and tighten everything back down. Pulley installation is easy and the reverse of the removal steps. Keep center nut slightly loose while tightening the tension adjusting bolt.

When to replace serpentine belt on VW Jetta?

Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump. Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles.

Where can I get a drive belt replacement?

Nissan Pathfinder Serpentine/Drive Belt Replacement at your home or office. Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

What should I do about my Nissan Pathfinder?

TRY TO FIX MYSELF ANYTHING I CAN. AND HELP OTHER PEOPLE THAT MAY HAVE SAME PROBLEM SHOWING WHAT’S CRAZY FROM THE WORLD Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.

How do you change a serpentine drive belt?

Use a 3/8″ ratchet to push the tensioner away (up) from the belt. To get to the tensioner, you will either remove the passenger wheel or drive the car up on rams. This will allow you to remove the plastic cover on the wheel well to access the tensioner.

Where is the serpentine belt tensioner on a Nissan?

Locate the serpentine belt tensioner on your Nissan. You will need to move the tensioner away to release pressure from the belt. Take a few pictures of the old belt before removal if you need to look at the belt routing later. Release Tensioner.

Allow your Nissan engine to cool down. Open the hood of your Nissan. Look at the frame or under the hood for the serpentine belt routing diagram. It is often printed on a sticker found on the fan shroud. Your browser does not support video tag.

Where do I find the serpentine belt on my car?

To access the serpentine belt, you will need to open the hood of the vehicle. The hood release can usually be found near the door on the driver’s side of the vehicle. With the hood released, you will also need to release the safety latch located at the front of the vehicle.

What makes up the serpentine belt in a car?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump.

How often should I replace my serpentine drive belt?

So school me on this replacement. The manual recommend replacement every 30K for premium service interval. On only inspection for the rest. I have never changed out mine at 87K, inspection has also looked good.

Navigation