How can I remove trim from my front door?
Step 1 Pry around the edge of the trim surrounding the door release with a panel tool to loosen and remove the trim ring. Pry open a screw cover in the bottom of the door pull up on the armrest. Pry up the switch panel with the power window buttons with a panel tool. Pry off the triangular sail panel at the top edge of the door panel.
How do you remove the dash from a Nissan Maxima?
Remove the air vents in the center of the dash by placing a hook tool into the top of the air vents. Gently pry on it until the clips come lose and the vents slide out. Remove the four bolts inside of the vent opening. Remove the glove box by opening it. Then push in on the sides while pulling on the glove box door.
How do you remove a door panel from a car?
Insert a screwdriver into the edge of the armrest cover and pry it off. The armrest cover may be concealing a fastening screw. Take a flathead screwdriver and wedge it into the crack at the edge of the panel. Apply gentle pressure to pop it out and remove it.
How do you remove fascia from a door?
Use a small screw driver or trim removal tool and detach (pop off) any trim pieces above the door panel. Here is an upper trim piece to the left of the panel. These pieces must be removed before removing the panel. 2. Remove Plastic Fascia Pieces
Step 1 Pry around the edge of the trim surrounding the door release with a panel tool to loosen and remove the trim ring. Pry open a screw cover in the bottom of the door pull up on the armrest. Pry up the switch panel with the power window buttons with a panel tool. Pry off the triangular sail panel at the top edge of the door panel.
How do you remove a power window panel?
Pry up the switch panel with the power window buttons with a panel tool. Unplug the wiring harnesses and remove. Pry off the triangular sail panel at the top edge of the door panel.
How do you remove sail panel from door?
Pry off the triangular sail panel at the top edge of the door panel. Pry around the edges of the door panel and release the clips behind the panel. Lift the panel off and remove it from the door.