What size is the axle nut on a 2000 Nissan Maxima?
32mm socket for the axle nut.
What size is the axle nut on a 2010 Nissan Maxima?
The 2010 Nissan Maxima has an axle nut size of m24 X1. 5 mm. The hex for this axle nut size is 1 and 1/4 inch.
How do you replace the cv shaft on a Nissan Maxima?
Pry the inner CV joint loose from the drive-axle hub. Replace the inner CV joint on your Maxima. Reinstall the drive-axle, along with the steering knuckle, rotor and caliper, placing a new outer CV joint axle on the CV housing on the drive-axle.
How do you remove a driveaxle on a Nissan Maxima?
Remove the driveaxle, starting by using a torque wrench to remove the hub nut from your wheel hub. You may need to use a pry bar to prevent the rotor from rotating while turning the hub nut. Wedge a pry bar between two wheel studs, with one end of the pry bar resting on the ground.
What should I do if my CV shaft is bad?
CV axles serve as the final link between the engine and the wheels. They serve the important function of transferring the torque from the drivetrain to the vehicle’s wheels in order to move the vehicle. If you suspect that one or more of your CV axle shafts may be having a problem, contact a technician to inspect the vehicle.
When do CV axles need to be replaced?
Because the CV axles are the direct link that transfers the power of the engine to the wheels, they are subject to high levels of stress over time and will eventually wear out and require replacement for proper functionality to return. When they do wear out, the CV axles will usually show symptoms to let the driver know they require attention.
Pry the inner CV joint loose from the drive-axle hub. Replace the inner CV joint on your Maxima. Reinstall the drive-axle, along with the steering knuckle, rotor and caliper, placing a new outer CV joint axle on the CV housing on the drive-axle.
What should lug nut torque be on Nissan?
The Nissan Wheel Lug Nut Torque Chart we have compiled can be used as a quick reference guide by roadside assistance providers or DIY enthusiasts when working on any Nissan vehicle.
Remove the driveaxle, starting by using a torque wrench to remove the hub nut from your wheel hub. You may need to use a pry bar to prevent the rotor from rotating while turning the hub nut. Wedge a pry bar between two wheel studs, with one end of the pry bar resting on the ground.
What do you need to replace a CV joint?
A CV joint replacement kit should include new band clips, a new rubber boot, grease and the CV joint itself. Slide the smaller of the two band clips onto the drive shaft, followed by the smaller end of the rubber boot.