How do you take the dash off of a Honda Accord?
Pry off the plastic on the face of the clock with the flat head screwdriver. Remove the screw behind the clock and pull the clock out of the dash. Pull the dashboard forward and unplug all its electrical connections. Remove the dashboard from the Honda.
Where is the instrument cluster on a 1996 Honda Accord?
In order to access the instrument cluster on a 1996 Honda Accord, you do not need to remove the entire dashboard. You only need to remove the upper dashboard panel above the instrument cluster, which is held in by two screws.
Where are the ignition keys on a Honda Accord?
Park the Accord and remove the keys from the ignition. Remove the two screws from the underside of the upper dashboard panel, directly above the instrument cluster. You will need a small Phillips screwdriver to access these screws. Pull the dashboard panel off the vehicle. This will give you access to the instrument cluster.
Where is the instrument cluster on a car?
You only need to remove the upper dashboard panel above the instrument cluster, which is held in by two screws. Once that is removed, the instrument cluster can be accessed if you wish to replace the dash light bulbs or the instrument cluster itself.
How do you remove a cluster from a clock?
Locate the screw at the top of the cluster and undo it. Locate the screw in the opening underneath the clock and undo it. Slide the cluster out. Then, disconnect the clock wiring harness plug. Figure 4. Remove both screws. Figure 5.
How do you get to the instrument cluster in a Honda Accord?
Pull the dashboard panel off the vehicle. This will give you access to the instrument cluster. Move the steering wheel as low as it can go so that you will have more room in which to work. Remove the three screws holding the instrument cluster to the Accord. Once those screws are removed, you can begin to pull the cluster toward you.
Park the Accord and remove the keys from the ignition. Remove the two screws from the underside of the upper dashboard panel, directly above the instrument cluster. You will need a small Phillips screwdriver to access these screws. Pull the dashboard panel off the vehicle. This will give you access to the instrument cluster.
You only need to remove the upper dashboard panel above the instrument cluster, which is held in by two screws. Once that is removed, the instrument cluster can be accessed if you wish to replace the dash light bulbs or the instrument cluster itself.
What’s the best way to move the instrument cluster?
Move the steering wheel as low as it can go so that you will have more room in which to work. Remove the three screws holding the instrument cluster to the Accord. Once those screws are removed, you can begin to pull the cluster toward you.