How to do idle Relearn on an I35?
1. Make sure that accelerator pedal is fully released. 2. Turn ignition switch to “ON”. 3. Turn ignition switch to “OFF” wait at least 10 seconds. Make sure that the throttle valve moves during above 10 seconds by confirming the operating sound. It is better to count the time accurately with a clock. 1.
What is the idle relearn procedure for a Nissan?
Battery voltage must be more than 12.9 V engine running at idle Electric load switches OFF. That means no A/C, headlamp, rear window defogger If you have daytime running lights (DRL) do this procedure to shut them off: BEFORE starting the engine: Apply the parking brake, or set the lighting switch to the 1st position.
Do you have to relearn idle when a battery is disconnected?
Many newer cars with powertrain control modules (PCMs) have to relearn engine idle after a battery is disconnected. The removal of electrical power from the engine erases idle memory from the PCM, the computer where it is stored.
How to reset the ECU on an Infiniti G35?
It is better to count the time accurately with a clock. 1. Perform “Accelerator Pedal Released Position Learning”. 2. Perform “Throttle Valve Closed Position Learning”. 3. Start engine and warm it up to normal operating temperature. 4. Turn ignition switch “OFF” and wait at least 10 seconds. 5.
1. Make sure that accelerator pedal is fully released. 2. Turn ignition switch to “ON”. 3. Turn ignition switch to “OFF” wait at least 10 seconds. Make sure that the throttle valve moves during above 10 seconds by confirming the operating sound. It is better to count the time accurately with a clock. 1.
Why is my Infiniti G35 throttle body so dirty?
Share it! The throttle body for the Infiniti G35 is known for carbon buildup, and requires regular, light cleaning to maintain peak performance. After cleaning the throttle body, many owners notice a very high idle, erratic (bouncing) idle, and unpredictable power surging.
It is better to count the time accurately with a clock. 1. Perform “Accelerator Pedal Released Position Learning”. 2. Perform “Throttle Valve Closed Position Learning”. 3. Start engine and warm it up to normal operating temperature. 4. Turn ignition switch “OFF” and wait at least 10 seconds. 5.
Do you have to do a throttle relearn?
The TB was tagged indicating that a throttle relearn must be performed. Vehicle is a 2013 Takoma TRD/4.0 V6. That relearn procedure is the about the stupidest thing I’ve seen on here. I had to go to the post office this morning and tried something.