How do you remove drive belt from AC compressor?
Remove the drive belt from the compressor’s pulley wheel by loosening the tension on the belt. For serpentine systems, press firmly on the tension pulley arm and slide the belt out from underneath the idle pulley. On single belt systems, the compressor has an \”adjustment bolt\” that will allow the unit to slide when loosened.
How do you remove serpentine belt on Honda Accord?
Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2. Put the wrench right on the center nut and pull clockwise. While maintaining clockwise pressure on the pulley wrench, slide the worn belt off the pulleys.
What kind of wrench do I need to remove belt on Honda Accord?
A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2.
When to replace the a / C compressor in a Honda Accord?
The compressor can wear out and require replacement; this can take the average backyard mechanic about an hour to complete. Evacuate the A/C system with certified collection equipment by taking your Honda Accord to a garage or oil-change facility.
Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2. Put the wrench right on the center nut and pull clockwise. While maintaining clockwise pressure on the pulley wrench, slide the worn belt off the pulleys.
How do you remove a belt from an air conditioner?
Loosen and/or remove the pivot bolts. Then, push the compressor away from the belt. Note: Some compressors use an idler wheel tensioner. In this case, instead of loosening pivot bolts, you’ll loosen the locknut on the idler adjusting screw. Then, turn the adjuster until the belt is loose enough to be removed. Step 2: Remove the belt.
A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2.
The compressor can wear out and require replacement; this can take the average backyard mechanic about an hour to complete. Evacuate the A/C system with certified collection equipment by taking your Honda Accord to a garage or oil-change facility.
Remove the drive belt from the compressor’s pulley wheel by loosening the tension on the belt. For serpentine systems, press firmly on the tension pulley arm and slide the belt out from underneath the idle pulley. On single belt systems, the compressor has an \\”adjustment bolt\\” that will allow the unit to slide when loosened.
How do you remove a compressor from a Cadillac?
Remove the compressor mount nuts and slide the mount bolts out. The compressor will now be free for removal, and can be manipulated out of the engine compartment. Check the A/C fuse before replacing the compressor. Do not attempt this procedure without disconnecting the battery. Use extreme caution when working with freon.
How do you remove Freon line from AC compressor?
Disconnect the freon lines by turning the compressor’s line bolts counterclockwise with the line wrench. Some systems use a standard nut size, and can be removed from the compressor with a normal wrench. Store them away from the compressor.
Can a Cadillac air conditioner compressor wear out?
Most Cadillac automobiles were manufactured with air conditioning systems, which use a compressor to circulate a freon coolant through the system. This compressor operates at high pressures and can wear out or fail, requiring replacement. Have the air conditioning system evacuated with professional equipment at a garage or oil change center.