What is Ikey system error?
The I-Key System Error message warns of a malfunction with the Intelligent Key system. If the light comes on while the engine is stopped, it may be impossible to start the engine. If the light comes on while the engine is running, you can drive the vehicle.
How do I start my Infiniti QX60 with manual key?
Once the key fob is in, press the Start/Stop button while pressing the brake pedal down. This should start the car.
What is a I key?
The NISSAN Intelligent Key® (I-Key) system allows the customer to lock or unlock the vehicle, open the liftgate and start the engine. When adding I-Keys to the vehicle.
Can you start an Infiniti with the key?
In specific INFINITI models, such as the Q60 Convertible and Coupe, the QX50 and QX70, there is a key port located on the lower left dash panel. You can insert the key fob into that port and then press the ignition button to start the engine.
What is an intelligent car key?
Intelligent Key utilizes antennae that transmit signals between the car and the key, and a tuner that receives the signals. Pressing the Request Switch transmits a signal from the car antenna, and the key that receives the signal then automatically returns a signal.
Why is my I-key system not working?
Once you press the button, the switch is off or if off if not in park. When I turned the car on and switched it to drive the i-key system error came on. The drive indicator showed the correct gear and the car ran fine. When I scanned the car, b2603 came up.
Why is there a key system error light on the dash?
Forum for Infiniti M37, M56 M35h Hybrid and Q70 owners. Anyone found the reason for the key system error light on dash. I know its not the Key Fob battery or the main battery cause they were all replaced and still having the issue. tried resetting computer and nothing.
When do I-key system errors need to be cleared?
Reading the Factory manual states if the Key/car red light is blinking…. the system is good. During repair, when electronic components are disconnected…… it initiates an such system error code. Those codes of BCM need to be cleared…… first. Like some generous people posted on Youtube …
Why is my Nissan Altima saying I-Key System Error?
Hey guys, had a question and was wondering if anyone knew the solution. I have a 2014 Altima 2.5 S. When getting in last night the message “I-key system error” was on the dash display. The manual says go see a dealer but I wanted to know if I could fix the error myself.
Once you press the button, the switch is off or if off if not in park. When I turned the car on and switched it to drive the i-key system error came on. The drive indicator showed the correct gear and the car ran fine. When I scanned the car, b2603 came up.
What to do if your Nissan key won’t start?
If the light comes on while the engine is running, you can drive the vehicle. However, repair as soon as possible. checks and adjustments section. When you hit the Engine start button, without pressing the brake (or clutch) are you able to change modes? If so, you might be able to reprogram a new FOB (the key).
Why is my smart key not working on my car?
Before reconnecting the battery again, make sure the keyfob is inside the car. The ECU apparently only attempts to reprogram the remote functions on a cold boot and if the key fob is not within range, it won’t work. Both of my remotes were dead and I did this on each one – one at a time.
Reading the Factory manual states if the Key/car red light is blinking…. the system is good. During repair, when electronic components are disconnected…… it initiates an such system error code. Those codes of BCM need to be cleared…… first. Like some generous people posted on Youtube