What are the symptoms of the p2101 code?
The TAC motor wires are cross wired causing an open circuit to the ECM. Harness or connector has an open circuit or the connector is loose. What are the symptoms of the P2101 code? The Check Engine Light will be illuminated and the code is set in ECM memory as a fault. The engine will not accelerate and no throttle response will happen.
What do I need to know about Nissan p1122 code?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Start by performing the “Idle Air Volume Learning Procedure”, if the problem persists the Electric Throttle Control Actuator may need to be replaced. What does this mean? The cost of diagnosing the P1122 NISSAN code is 1.0 hour of labor.
What was the cause of the Nissan p2138 accident?
P2138 NISSAN Possible Causes 1 Faulty Accelerator Pedal Position Sensor 2 Accelerator Pedal Position Sensor harness is open or shorted 3 Accelerator Pedal Position Sensor circuit poor electrical connection 4 Faulty Electric Throttle Control Actuator
What do you need to know about Infiniti G37?
MODIFICATIONS TO AND/OR TAMPERING WITH THE SUPPLEMENTAL SIDE AIR BAG SYSTEM AND/OR THE AIR BAG OCCUPANT CLASSIFICATION SENSOR
The TAC motor wires are cross wired causing an open circuit to the ECM. Harness or connector has an open circuit or the connector is loose. What are the symptoms of the P2101 code? The Check Engine Light will be illuminated and the code is set in ECM memory as a fault. The engine will not accelerate and no throttle response will happen.
What does p2101 mean on a throttle actuator?
P2101 is a diagnostic trouble code (DTC) for “Throttle Actuator Control Motor Circuit Range/Performance”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.
What does it mean when your EPC light comes on?
A failed brake pressure sensor (Inside the ABS Module) The easiest and fastest way to find the problem when your EPC light appears is to read the trouble codes from your car with an OBD2 Scanner. When the EPC light is on, it means that there are one or several trouble codes stored in one of your control units.
What causes an EPC light on an Audi?
The most common causes of an EPC light on your Audi or VW is a faulty throttle body, a faulty ABS sensor, ABS ring or a faulty brake pedal switch. Here is a more detailed list of possible causes of the EPC Light. Throttle body failure; Bad ABS Sensor – Common on newer VW Passats; Failed brake pedal switch – Common problem on Golf 4 & Fabia