Does 2003 Honda Accord have VTEC?
The LX Coupe V6 comes with a 5-speed automatic…
How much horsepower does a Honda Accord have?
The H23A VTEC engine was installed in JDM Honda Accord Wagon AWD, where it reached 190 HP @ 6,800 rpm, and the torque of 221 Nm at 5,300 rpm. The same motor was installed in JDM Accord Wagon SiR, but its power was boosted to 200 HP @ 6,800 rpm with the torque of 221 Nm @ 5,300 rpm. On H23A VTEC, the redline was set to 7,200 rpm. 2.
How much torque does a 2011 Honda Accord have?
Here are the torque specifications for the different 2011 Honda Accord models. Technically, these models would be the bottom of the line for the Accord series. However, in the long run, the torque specs are not all that different. These models would have 161 foot-lbs. torque at 4,300 rpm. These models would be in the middle of the Accord series.
Can a 2003 Honda Accord transmission be replaced?
Unlike most automatic transmissions, the transmission in the 2003 Honda Accord does not have a replaceable transmission filter. So the approved transmission service procedure is a simple drain and fill similar to an oil change.
Is the Honda Accord a good car to drive?
Both engine options feel lively, and models with the base engine get good gas mileage. The Accord also handles well and rides smoothly over most road surfaces. “No matter what engine powers the Accord, its handling is effortlessly balanced, which makes navigating twisty roads a joy and long highway journeys a pleasure.”
What kind of engine does a Honda Accord have?
K24A3 – 197 hp (147 kW) at 6,800 rpm, 164 lb-ft (222 Nm) at 4,500 rpm. This engine is a Honda Accord engine. K24A4 – 160 hp (119 kW) at 5,500 rpm, 161 lb-ft (218 Nm) at 4,500 rpm.
What are the specs of a 2003 Honda Accord?
* Does not apply to fluid and filter changes. See Owner’s Manual for details. ** Select AT models are SULEV-certified in California only (500 per month). MT models are LEV-II LEV for other CARB states – Fuel (gal.) **Based on 2003 EPA mileage estimates. Use for comparison purposes only. Actual mileage may vary.
How big is the intake valve on a Honda Accord?
The intake valve diameter is 35 mm, exhaust valve – 30 mm; valve stem diameter is 5.5 mm. It was equipped with a variable geometry intake manifold (Honda’s 2-stage PPA intake manifold made from aluminum and composite material) and a 60 mm throttle body. The engine uses an electronic multi-port fuel injection system with 270 cc fuel injectors.
What kind of compression ratio does Honda Accord have?
The K24Z3 for the US Honda Accord had a 10.7:1 compression ratio, produced less power and torque; it was just a K24Z2 engine but with a high flow exhaust system. The true K24Z2 features a 10.5:1 compression ratio, R40 intake manifold, and an integrated exhaust manifold.