How do you use a reserve tank on a motorcycle?
When you set the petcock to “On” and start riding the fuel from the tank will be used until it reaches the top of the “Main” tube. At that point the bike will start to stumble and misfire. You then turn the petcock to “Reserve” and the engine will now get the fuel from the “Reserve” tube.
Which way does a motorcycle fuel filter go?
The new filter should have an arrow pointing in the direction of the fuel flow. Install the new filter with the arrow pointing toward the carburetor. If there’s no arrow, just install it with the larger end toward the carb.
How do you start a gas pump on a motorcycle?
Step 1 Pull up to a gas pump. Put your motorcycle up on its kickstand. Prepay or use a credit card if necessary to activate the pump, then put the nozzle all the way into the fuel door. Pump fuel into the bike until the safety shut-off valve engages and the pumping stops. Pull the nozzle out of the fuel door.
What’s the best way to fill a gas tank on a motorcycle?
The simplest way around this problem is outlined below. Pull up to a gas pump. Put your motorcycle up on its kickstand. Most motorcycle manufacturers recommend filling up motorcycle fuel tanks with the kickstand up because it puts the tank in the optimal position.
How to clean a fuel pump on a motorcycle?
How To Clean Your Motorcycle Fuel Pump 1 Drain Your Fuel Tank. Lucky for us, there wasn’t much gas in the tank, but still enough to make cleaning a pain. 2 Disassemble Your Fuel Pump. Now let’s turn our attention to the fuel pump. 3 Clean Or Replace Parts. The strainer will tell the true story, and will most likely look pretty cruddy. …
What to do if gas goes bad in your motorcycle?
If you plan on having your motorcycle sit for a while, you should always add a stabilizer to the gas. Fuel stabilizer is a solution that can provide protection to the gas sitting in your motorcycle. It bonds with the gas it is mixed with and helps prevent the gas from vaporizing so quickly.
Step 1 Pull up to a gas pump. Put your motorcycle up on its kickstand. Prepay or use a credit card if necessary to activate the pump, then put the nozzle all the way into the fuel door. Pump fuel into the bike until the safety shut-off valve engages and the pumping stops. Pull the nozzle out of the fuel door.
The simplest way around this problem is outlined below. Pull up to a gas pump. Put your motorcycle up on its kickstand. Most motorcycle manufacturers recommend filling up motorcycle fuel tanks with the kickstand up because it puts the tank in the optimal position.
How To Clean Your Motorcycle Fuel Pump 1 Drain Your Fuel Tank. Lucky for us, there wasn’t much gas in the tank, but still enough to make cleaning a pain. 2 Disassemble Your Fuel Pump. Now let’s turn our attention to the fuel pump. 3 Clean Or Replace Parts. The strainer will tell the true story, and will most likely look pretty cruddy.
When do you shut off the gas tank on a motorcycle?
Motorcycle owners face a constant struggle at the fueling pump. Most commercial gas station pumps are designed with four-wheel auto gas tanks in mind, and the safety shut-off valves are designed accordingly. When you fill up a motorcycle gas tank with one of these, the safety shut-off valve will usually engage when your tank is only partially full.