How do you Mark timing marks on a camshaft?
Mark the timing mark on both the left and right hand side camshaft pulleys with metal marker or white out. Do the same with the timing marks on the case. This makes it easier to visually line up the marks while installing the new timing belts.
What are the maintenance procedures for a Honda cr80r?
This CR80/85/125/250-R maintenance guide describes the Honda CR80R, CR85R, CR125R & CR250R procedures as general procedures for Honda CR80R / CR85R / CR125R & CR250R motorcycles.
Where is the F timing mark on a Honda bike?
As the “F” timing mark comes around to the mark on the crankcase, the light should come on just as they line up. This mark is before the top dead center (TDC) mark. It the light comes on at any other time, loosen the screws on the points plate and turn it so the marks align as the light illuminates.
How do you change the timing on a Honda bike?
Loosen the small screws on the face of the timing plate one-half turn with a flat-tip screwdriver. Insert the tip of the screwdriver into the adjustment notch at the base of the timing plate. Aim the timing light at the indicator.
Mark the timing mark on both the left and right hand side camshaft pulleys with metal marker or white out. Do the same with the timing marks on the case. This makes it easier to visually line up the marks while installing the new timing belts.
How do you set the timing on a Honda motorcycle?
Carefully turn the motor over using the ratchet and deep socket one time, until the timing mark comes back around to the center of the window. Check all timing marks again. When all marks are aligned, and the tensioner and all pulley bolts have been tightened, install the timing belt covers. Park the motorcycle on its kickstand.
How do you change the timing on a Honda Accord?
Twist the handle of the screwdriver to the right or left, as necessary, until the timing mark is directly in line with the indicator. Tighten the screws securely on the face of the timing plate. Turn off the engine. Disconnect the timing light leads from the spark plug wire and the coil wire.
When to service a Honda cr125r dirt bike?
Always service your motorcycle (dirt-bike) more frequently if the motorcycle is ridden in dusty areas, sand or snow. Also service your bike more frequently if the motorcycle is ridden in very wet or muddy conditions. For a detailed checklist and maintenance schedule chart see download manual links above for complete intervals guide.