Are there any problems with the stator water system?

Are there any problems with the stator water system?

Problems on Stator water coils and solutions Copper Corrosion:  As the Stator water chemistry copper corrosion is not a normally problem firstly but if the poor chemistry maintenance can lead to another problems if it excess or less.  The copper does not react with pure water (DO – less than 5ppb, pH= 7).

How is water cooled in a stator cooling system?

So that adopted the Hydrogen-Water cooling system.  The stator windings are directly water cooled by Deionized water. Supplied by a closed loop cooling system.  Deionized water flows through hollow copper strands located in the stator windings. 6. Introduction: Briefly the schematics for stator water system is : 7.

What causes a stator water coil to leak?

Problems on Stator water coils and solutions  Copper Corrosion & Plugging in copper hallow conductors  Water leakage of stator windings  Clip-to-strand leak due to crevice corrosion.  End-winding vibration  Increase in conductivity of water.  Deposits on insulating hoses. 12.

Which is the best description of stator water treatment?

High Dissolved Oxygen and Neutral pH Description: 1.This is possibly can be regarded as the simplest form of stator water treatment, and is put into practice where oxygen cannot be excluded from the system. In this treatment regime, the objective is to form evenly distribution stable oxide layers (CuO).

What to do if you have a bad stator?

Without a good stator, your engine will run poorly or not at all. This solution completely bypasses the stator by using a 12 volt battery to power the ignition system. Everything required can be purchased for under $50. It will work on all contact breaker point engines (old style), and some electronic controlled ignition (newer style) ones.

What does a stator do on a Harley Davidson?

by Chris Gilliland. The stator is an integral part of your Harley-Davidson Softail motorcycle’s charging system, generating an electrical field that is manipulated by a rotating magnetic flywheel to generate an alternating electrical current.

What happens when a stator dies on an engine?

While a stator is dying, it can produce a weak spark, causing the engine to miss or run poorly. Symptoms are often worsened as the engine warms up. This needs to be a fairly heavy duty coil. I previously tried using two universal coils intended for small engines.

How much does it cost to get a new stator?

Create a Battery-op Ignition System for Less Than $50 The cost of a new stator can be hundreds of dollars. Without a good stator, your engine will run poorly or not at all. This solution completely bypasses the stator by using a 12 volt battery to power the ignition system.