What kind of engine did a 1988 Harley Davidson Sportster have?
Harley-Davidson’s 1988 Sportster-series motorcycle were powered by a then-new Evolution engine. Unlike the Twin-Cam engines used by the newer Softail and Touring models, which used separate transmission and primary chain-drive components, the Sportster housed both components in the primary chain case.
How to change primary case oil on 1988 Harley Davidson Sportster?
Clean the drain plug with a lint-free shop rag, then screw the drain plug into the bottom of the primary chaincase by hand. Tighten the drain plug to 6 foot-pounds, using a torque wrench and a T-40 Torx socket.
What’s the correct torque for a Sportster transmission?
The correct torque specification is 14 – 21 ft-lbs (168 – 252 in-lbs). Insert the nozzle of a funnel into the primary chain inspection hole. Pouring slowly, pour approximately 1 qt of oil into the transmission. As you pour, watch the clutch inspection hole. Make sure that the oil level stays below the edge of the clutch inspection hole.
How to remove clutch cover from Sportster Evolution?
Insert a heavy duty spudger or similar prying tool into the gap between the clutch inspection cover and the transmission housing near where clutch cable enters the housing. Gently pry the clutch inspection cover away from the transmission housing. The clutch cover spring may fall out.
Harley-Davidson’s 1988 Sportster-series motorcycle were powered by a then-new Evolution engine. Unlike the Twin-Cam engines used by the newer Softail and Touring models, which used separate transmission and primary chain-drive components, the Sportster housed both components in the primary chain case.
Clean the drain plug with a lint-free shop rag, then screw the drain plug into the bottom of the primary chaincase by hand. Tighten the drain plug to 6 foot-pounds, using a torque wrench and a T-40 Torx socket.
What kind of chain tensioner does a Harley Davidson use?
Only 11 left in stock – order soon. AfterMokit Replacement Cam Drive Chain Tensioners for Harley Davidson Dyna 1999-2005 Road King Electra Glide Ultra Classic Road Glide 1999-2006 Street Glide 2006 Softail 2000-2006 Mount Space 0.7 inch .
The correct torque specification is 14 – 21 ft-lbs (168 – 252 in-lbs). Insert the nozzle of a funnel into the primary chain inspection hole. Pouring slowly, pour approximately 1 qt of oil into the transmission. As you pour, watch the clutch inspection hole. Make sure that the oil level stays below the edge of the clutch inspection hole.