What weight is Harley-Davidson transmission oil?
Is there any problem with this? Our answer: It is perfectly acceptable to use 75W-140 gear oil in Harley-Davidson transmissions. But, do consider that 75W-140 is much thicker than oils typically used in Harley transmissions. For instance, AMSOIL V-Twin Synthetic Transmission Oil is an SAE 110 gear oil.
How to change the oil in a 2003 Harley Davidson?
Softail models place the drain plug between the rear shock absorbers. Place your oil catch pan beneath the drain plug and drain the transmission fluid completely. Clean off the drain plug and replace the O-ring before reinstalling the plug.
How much oil do you put in a Harley Davidson Sportster?
Tighten the the hose clamp with a flathead screwdriver. Using a funnel, fill the oil tank with 3 quarts of oil. Although capacity of the engine is 3.5 quarts, you only use 3 quarts when replacing oil.
How to do an oil change on a Harley Davidson Twin Cam?
Screw the filter on until the gasket makes contact with the oil filter housing, then turn it another 3/4 or a turn. This must always be done by hand. Never use a wrench to tighten an oil filter. Drain the primary chain case. This is the beginning of the final leg of your oil change. Find the drain plug in the bottom side of the chain case.
Where is the oil cap on a Harley Davidson?
Remove the oil cap, this can be found on the right side of the motorcycle just below the seat. This releases pressure and will allow the oil to drain more easily. Unlike other motorcycles, the Harley Sportster Evolution engine uses an oil drain tube, if you don’t have an oil drain tube, these aren’t the right instructions.
Do you need to change the oil on a Harley Davidson?
To keep your air-cooled V-Twin performing for years to come, it should be topped off with quality Harley-Davidson oils and chemicals. Your internal engine parts take a beating, which why you should frequently check your engine oil as well as regularly change your oil filter on Harley-Davidson motorcycles.
Where is the oil plug on a Harley Davidson?
Locate the primary drain plug on the motor’s left primary housing. The drain plug is located under the round derby cover on the primary. Place your oil catch pan below the plug and drain the primary fluid completely. Clean the drain plug replace the O-ring before reinstalling the plug onto the primary housing.
Where is the oil catch pan on a Harley Davidson?
Locate the transmission drain plug. The drain plug is normally centered on the back of the motor. Softail models place the drain plug between the rear shock absorbers. Place your oil catch pan beneath the drain plug and drain the transmission fluid completely. Clean off the drain plug and replace the O-ring before reinstalling the plug.