What kind of rake do you use on a motorcycle?
RAKED TRIPLE TREES:In order to bring trail figures back into line, triple trees with raked steering stems can be used. Usually adjustable in 3, 5, 7 degrees of rake. HOW TO MEASURE CORRECT TRAIL Raise the bike to an upright position, using a tape measure, hold the tape straight down from the front axle to the floor.
Is there an offset between Trail and rake?
Messing with the design of the bike may even result in a negative trail, which is not recommended. The offset is also calculated between two imaginary lines, like trail and rake.
What makes a bike have a trail and rake?
A bike’s trail and rake are also influenced by other factors in addition to the frame of construction, including: Wheel diameter – A small rear wheel will increase the trail and rake while a smaller front wheel will reduce the trail and rake
What’s the difference between rake and trail on a CB1000R?
Note also that, despite having the same wheelbase (1455mm), the CB1000R and CBR1000RR-R have different rake and trail numbers. Take a line and draw it through the steering axis until it meets the ground.
What kind of rake kit does a Harley Davidson have?
#172 2007 FXSTC 18 deg. rake kit w/+6″ tubes. #174 1990 FXST 14 deg. rake kit w/+6″ tubes. #162 2008 FXSTB 18 Degree Rake Kit w/ + 4” tubes. #158 2007 FXSTB 18 Degree Rake Kit with + 4″ tubes. #143 2008 Harley® Night Train with 18 Degree with + 4″ tubes.
RAKED TRIPLE TREES:In order to bring trail figures back into line, triple trees with raked steering stems can be used. Usually adjustable in 3, 5, 7 degrees of rake. HOW TO MEASURE CORRECT TRAIL Raise the bike to an upright position, using a tape measure, hold the tape straight down from the front axle to the floor.
How big is the soft tail on a Harley Davidson?
# 65 2003 Soft Tail 14 degree with 4″ over stock tubes. # 52 202 FXSTD 14 degree with 8″ over stock tubes. # 37 99 FXSTC 14 degree with 8″ over stock tubes. # 32 1999 FXST 14 Deg. 8″ over tubes. # 23 2004 FXSTB 14 deg. 8″ over. # 7 FXSTC 14 deg. 8″ over tubes.
What’s the distance between a rake and a trail?
TRAIL:The distance defined by the vertical line from axle to ground and the intersection of centerline of the steering neck and ground. RAKED TRIPLE TREES:In order to bring trail figures back into line, triple trees with raked steering stems can be used.