Can you jumpstart a motorcycle with fuel injection?

Can you jumpstart a motorcycle with fuel injection?

On some, no you can’t. On those you can, many are difficult. You usually push start a bike because the battery is dead, or too weak to turn the starter. On a fuel injected bike, you have you pressurize the fuel system, initiate the computer and sensors and have enough juice left over to fire the ignition system.

Is there a problem with my EFI idle?

Discussion in ‘ Engine, Fuel and Exhaust ‘ started by Fisherking, May 16, 2016 . Im getting a code that reads on my power vision that says EFI idle problem .

What does the EFI do on a Harley Davidson?

It’s controlled by output signals from the ECM to open and close as needed to allow enough air into the engine for starting and idle operation. It’s function is to bypass the throttle blade in the intake and allow enough air to bypass the throttle blade to run the engine.

How does electronic fuel injection ( EFI ) work?

This leads to things like slow warm ups, surges at small throttle openings and emission outputs that are borderline legal, and may be pushed over the edge by even the slightest adjustment or change in jetting.

What happens to the carburetor venturi during EFI?

When a carbureted engine is running, airflow creates a low-pressure area in the carburetor venturi.

Why does my ECU go bad when I jump start my car?

If the voltage is 6 or less, then this is likely causing your ECU problems. Whenever a jump start is performed on your battery, you need to ensure that the jumper cables are attached properly. If you perform a jump start with the cables attached incorrectly, then it could short out your ECU by causing it to spike too quickly.

Can a car battery be used to jump start a motorcycle?

Using a car battery to jump start a motorcycle isn’t typical or ideal, but it can help get you home or to a mechanic in a pinch. This really should only be done if no other method is possible.

Can a flat battery damage an ECU in a car?

” Jump-starting your car incorrectly is one of the most common ways to damage an ECU.” He advised: “Be very aware of the polarity of the jumper leads when jump-starting a vehicle with a flat battery – many ECU’s have been damaged by short-circuiting the jumper leads.

What happens if you Jumpstart your car incorrectly?

Jumpstarting your car incorrectly is one of the most common ways to damage an ECU.