Where is the oil drain plug on a 2002 Ultra Classic?
The oil drain plug is on the far left side of the oil pan and it points forward. Use a 5/8 wrench to loosen it and a 1/4 allen to tighten it.
When to replace the drain plug on a Harley Davidson?
If the engine oil or transmission oil drain plug allocation becomes stripped on a touring model, the entire oil pan may need to be replaced. This holds true for, both, Twin Cams and M8 Touring models. If the primary drain plug allocation becomes stripped, the inner primary case may need replacement.
Where is the oil drain plug on a V-twin?
Place the bike on the jiffy stand to check engine oil or to change engine oil. The engine must be at normal operating temperature. 2. Remove oil filler cap/dipstick to help drain the oil. 3. Remove the engine oil drain plug. It points forward. It is located on the front left side of the oil pan. It is a 5/8 inch socket. 4. Drain the engine oil. 5.
When to remove oil plugs on Harley Davidson?
It is of utmost importance to remove the engine oil and transmission oil fill plugs along with the primary derby cover; either before draining the oils or before the drain plugs are reinstalled. This will help to avoid confusion as to whether or not the oil has been replenished before attempting to start the motorcycle.
Where is the drain plug on a Harley Davidson Dyna?
Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained. Tighten the drain plug to 18 foot-pounds with a torque wrench.
Where do you drain oil on a Harley Davidson?
Drain the transmission oil. The transmission drain plug it centered directly above the shock absorbers. Because both the engine and transmission drain plugs are so close to each other, they can easily be drained simultaneously into the same drain pan. Stand your Harley upright.
Place the bike on the jiffy stand to check engine oil or to change engine oil. The engine must be at normal operating temperature. 2. Remove oil filler cap/dipstick to help drain the oil. 3. Remove the engine oil drain plug. It points forward. It is located on the front left side of the oil pan. It is a 5/8 inch socket. 4. Drain the engine oil. 5.
Where is the oil drain plug on a softail motorcycle?
Unscrew the engine oil drain plug with a 5/8-inch socket and a socket wrench. On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan.