How do you start a fitech fuel injection engine?
To get engine to start you may have to press the throttle pedal slightly. If the engine wont stay running without keeping your foot on the pedal a little turn the throttle adjustment screw clockwise another half turn.
What does fuel injection do to a motorbike?
Haley Davidson’s newer models now use Fuel injection systems for their motorbikes. The Fuel-injected motorbikes generally come up with higher idling. As those manufacturing factories set the appropriate idle for these motorbikes and control them electronically, the idle adjustment process is quite different from those previous motorbikes.
Where is the fuel screw on a 2stroke bike?
It just sets the engine rpm at ’’idle’’ run. 2stroke machines have an Air screw and 4 stroke machines have a Fuel screw. I hope you note this VERY well. Air screw is located on the carb away from the engine. [ Engine – Carburettor – Air screw] Fuel screw is located on the carb but its near the engine. [Engine – Fuel screw – Carburetor].
How does an electronic fuel injection system work?
An Electronic-Fuel-Injection or EFI-system means a system of fuel delivery controlled by a computer. The electronic-control-unit or ECU reads different sensors like RPM, the engine’s temperature, the temperature of the air, the position of the throttle and crankshaft, and the manifold pressure of the vehicle.
How to adjust Cold idle with fuel injection?
Adjust the cold idle to about 1500 rpm’s. Turn the bike off; put it back together; and pull the ecm and fuel pump fuses for a few minutes (under the right side cover). You’re done. (after you replace the fuses) I had the same problem with my ’01 (MM efi) Road King Classic.
Haley Davidson’s newer models now use Fuel injection systems for their motorbikes. The Fuel-injected motorbikes generally come up with higher idling. As those manufacturing factories set the appropriate idle for these motorbikes and control them electronically, the idle adjustment process is quite different from those previous motorbikes.
An Electronic-Fuel-Injection or EFI-system means a system of fuel delivery controlled by a computer. The electronic-control-unit or ECU reads different sensors like RPM, the engine’s temperature, the temperature of the air, the position of the throttle and crankshaft, and the manifold pressure of the vehicle.
Do you need a fuel pump for an EFI conversion?
All EFI conversions require an electric fuel pump and the removal of your mechanical fuel pump. At a minimum this will require removal of the pump and push rod (if so equipped) and a fuel pump block-off plate (about $10). You also need to remember, you’ll need to plan how to wire the electric fuel pump regardless of style chosen.