How do I find the model of my Yamaha motorcycle?
If you have a traditional motorcycle, it will be on the right side of the steering stem, just below the handlebars. If you have a scooter, check the stem. If it’s not there, it will be on a metal plate affixed to the frame.
Where is the VIN on a Yamaha Virago?
The serial number of the frame is in two locations: engraved on the right side of the frame, while sitting on the motorcycle, and on a label on it. The label is usually on the neck of the address, below the handlebars, visible when the front tire is located to the right.
Where is the engine number on a Yamaha Virago?
Stamped on the right side of the crankcase while sitting on the motorcycle, the crankcase engine number is alpha-numeric with a prefix followed by the general part number. The three-position prefix identifies the Virago model, with the following digits being the general part number.
What kind of bike is a Yamaha Virago?
It’s a Virago Series, 700 cc, Cast Wheels, 1986, California Model, Yamaha motorcycle. Finally, a few comments on some of the models. From ’81 – ’83 all Viragos were shaft drive, mono-shock, with the exception of the “Euro” models which were also mono shock but had chain drive. In ’84 Yamaha went to the more cruiser-like look.
When did the Yamaha Virago 535 come out?
In ’84 Yamaha went to the more cruiser-like look. As part of this, the mono-shock was dropped in favor of dual shocks for all models from then on. From ’83 on, all large models were shaft drive. The 535 was first seen in 1987. It dropped out of the line-up in 1991/2, but came back in 1993 and lasted through the 2000 model year.
Where can I find the VIN on a virago?
One can identify a Virago by decoding the frame serial number/Vehicle Identification Number (VIN) and the engine serial number. Find the frame serial number.
What is the model number on a Yamaha Virago?
The prefix is the primary Virago model identifier and is unique to that year and size engine, with the following six digits being the sequential production number, or the order in which that particular Virago rolled off the assembly line. The example, “1TW-080657” is a 1998 XV1100 Virago.
In ’84 Yamaha went to the more cruiser-like look. As part of this, the mono-shock was dropped in favor of dual shocks for all models from then on. From ’83 on, all large models were shaft drive. The 535 was first seen in 1987. It dropped out of the line-up in 1991/2, but came back in 1993 and lasted through the 2000 model year.
When did the Yamaha Virago go to shaft drive?
In ’84 Yamaha went to the more cruiser-like look. As part of this, the mono-shock was dropped in favor of dual shocks for all models from then on. From ’83 on, all large models were shaft drive.
What kind of shocks does a Yamaha Virago have?
From ’81 – ’83 all Viragos were shaft drive, mono-shock, with the exception of the “Euro” models which were also mono shock but had chain drive. In ’84 Yamaha went to the more cruiser-like look. As part of this, the mono-shock was dropped in favor of dual shocks for all models from then on. From ’83 on, all large models were shaft drive.
How do I find out what model my motorcycle is?
Motorcycle VINs are usually stamped into the steering neck of the motorcycle. This is located just behind the front forks, behind the headlight (if equipped).
What does a motorcycle VIN number tell you?
While they may seem like random strings of characters, VIN codes reveal the motorcycle’s manufacturer, its model, engine size and other characteristics, where the motorcycle was manufactured (both country and plant), as well as the year it rolled off the assembly line.
How can you tell what year a motorcycle is by the VIN number?
The 10th character in the 17-character VIN represents the vehicle model-year. This standard applies to vehicles built in or after 1981.
When does the VIN number on a Yamaha motorcycle come out?
It concerns all Yamaha Motorcycle models from 1995 untill 2012. The Yamaha motorcycle VIN Number / model prefix is alphabetical listed by prefix / VIN Number code:
Where to find the VIN on a Yamaha Raptor 700 ATV?
Yamaha ATV VIN Location – This Yamaha Raptor 700 ATV VIN can be found stamped into the the left side, frame rail, just beneath the shifter. Where can I find my Motorcycle VIN? Motorcycle VINs are usually stamped into the steering neck of the motorcycle. This is located just behind the front forks, behind the headlight (if equipped).
Where is the VIN number on a Yamaha xj550?
You can find it next to or behind the clutch cover just on the right part of the motor. It’s a small pad that’s looking into the sky. Yamaha XJ550 models have the code is placed left to right while on other models it’s front to back. The vintage Yamaha VIN decoder will decipher any code from any location on the bike.
How to get free motorcycle Identification Number ( VIN )?
Free Motorcycle Identification Number (VIN) Decoder & Lookup. Use the Cyclepedia Motorcycle VIN Decoder to decode you ATV, motorcycle or scooter VIN (Vehicle Identification Number) for FREE. Determine the year, make and model of most popular ATVs, motorcycles and Scooters.