How do you check the oil on a 2009 Honda Shadow?

How do you check the oil on a 2009 Honda Shadow?

Registered

1. With the bike on the sidestand remove the dipstick and wipe it clean.
2. Reinsert the dipstick but do not screw it in.
3. Sitting on the bike, stand it upright for a few seconds.
4. Return the bike to its sidestand and dismount.
5. Remove the dipstick and read the oil level on the stick.
6. Tah da.

Where does the old oil go in a Honda Shadow?

Since I’m in a professional shop, recycling used oil and oil filters is easy–the old oil goes in the used oil barrel, while the drained filter goes in the used filter barrel; when each is full, our hauler takes them for processing. The old oil is re-refined and used again.

Where is the oil filter on a Honda Shadow 750?

The Shadow 750 oil filter is located near the rear tire. Step 6. Smear a little oil around the seal at the top of the O-ring on the filter to make it easier to remove next time. Step 7. Replace the old oil filter, and torque the new oil filter to 19 foot-pounds. Step 8. Refill the engine with oil.

How do you change the oil on a Honda Shadow 600?

Here’s the fresh new oil filter. Rub a bit of oil on the o-ring (on the bottom surface of the filter, where it contacts the bike) before installing it. Use the 17mm wrench (or cup wrench or strap) to spin on the new filter–it should be snug (hand tight) plus a quarter of a turn.

Where is drain bolt on Honda Shadow 750?

Find the drain bolt, which is located on the underside of the motorcycle. Next, get a drain pan ready and remove the bolt with a 17mm wrench to drain the oil. NOTE: Keep track of the drain bolt crush washer. If it’s missing or damaged, you’ll need to replace it. Use our Honda Shadow crankcase parts diagram if you can’t find the drain bolt (#21).

Since I’m in a professional shop, recycling used oil and oil filters is easy–the old oil goes in the used oil barrel, while the drained filter goes in the used filter barrel; when each is full, our hauler takes them for processing. The old oil is re-refined and used again.

The Shadow 750 oil filter is located near the rear tire. Step 6. Smear a little oil around the seal at the top of the O-ring on the filter to make it easier to remove next time. Step 7. Replace the old oil filter, and torque the new oil filter to 19 foot-pounds. Step 8. Refill the engine with oil.

Here’s the fresh new oil filter. Rub a bit of oil on the o-ring (on the bottom surface of the filter, where it contacts the bike) before installing it. Use the 17mm wrench (or cup wrench or strap) to spin on the new filter–it should be snug (hand tight) plus a quarter of a turn.

Find the drain bolt, which is located on the underside of the motorcycle. Next, get a drain pan ready and remove the bolt with a 17mm wrench to drain the oil. NOTE: Keep track of the drain bolt crush washer. If it’s missing or damaged, you’ll need to replace it. Use our Honda Shadow crankcase parts diagram if you can’t find the drain bolt (#21).