What kind of engine does Suzuki GSX-R 750h have?

What kind of engine does Suzuki GSX-R 750h have?

Suzuki GSX-R 750H Make Model Suzuki GSX-R 750H Year 1987 Engine Four stroke, transverse four cylinder, D Capacity 749 c / 45.7 cub. in Bore x Stroke 70.0 x 48.7 mm

When to adjust valve clearance on Suzuki GSX-R 1000?

Valve clearance adjustment must be checked and adjusted, a) at the time of periodic inspection, b) when the valve mechanism is serviced, and c) when the camshafts are removed for servicing. Lift and support the fuel tank. Refer to “fuel tank removal and installation” in section 1g (page 1g- 9). Remove the air cleaner box.

What kind of suspension did the 1986 GSX r750r have?

The 1986 GSX-R750R offered even a new electrically activated front suspension system (NEAS), 310 mm floating front brake discs, steering damper, racing type adjustable clutch-lever, dry clutch, single racing seat, remote rear damper reservoir, amber halogen head lights and more. FIFTY FEET AHEAD.

How much does a Suzuki GSX750 front fork weigh?

According to Suzuki, the new aluminium frame, constructed from a combination of cast sections and extruded tubes, weighed just I8lb (8kg). half as much as the GSX750″s less rigid steel item. Front forks were stout 41 mm units, their rigidity boosted by an aluminium brace.

Valve clearance adjustment must be checked and adjusted, a) at the time of periodic inspection, b) when the valve mechanism is serviced, and c) when the camshafts are removed for servicing. Lift and support the fuel tank. Refer to “fuel tank removal and installation” in section 1g (page 1g- 9). Remove the air cleaner box.

What are racing numbers on 1986 Suzuki GSX-R 750g?

The gun-coat engine finish, gold-plated chain, blue-coated wheels and two sets of racing numbers is not all.

How big is tappet Shim on Suzuki GSX-R 1000?

For the purpose of this adjustment, a total of 21 sizes of tappet shim are available ranging from 1.20 To 2.20 Mm in steps of 0.05 Mm. Fit the selected shim (2) to the valve stem end, with numbers toward tappet. Be sure to check shim size with micrometer to ensure its size.