How to read diagnostic trouble codes on Harley Davidson Softail?
For 2014 and later models, hold the odometer button down on the lift grip. Move the ignition switch to the ignition position. You’ll see the “DIAG” message displaying. Release the odometer button and press it again to read the different codes at each module.
Why is my Harley Davidson Softail not working?
These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause. This article applies to the Harley Davidson Softail.
How to test for parasitic draw on Harley Davidson Softail?
To test for a parasitic draw, place your multimeter to the amps setting in series with the battery. Do not turn your ignition on during this test. Remove the positive battery cable and attach one multimeter lead to the cable. Attach the other lead to the positive battery terminal. Read the current moving through the meter.
When to change stator on Harley Davidson Softail?
If the readings are low or zero, switch your meter to reads ohms, shut off the engine, and read the resistance between all five wires. A proper reading is around 0.2 ohms. The reading infinite or “OL” on your meter indicates an open circuit. The stator must be replaced.
For 2014 and later models, hold the odometer button down on the lift grip. Move the ignition switch to the ignition position. You’ll see the “DIAG” message displaying. Release the odometer button and press it again to read the different codes at each module.
These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause. This article applies to the Harley Davidson Softail.
When did the speedometer go out on my 2007 heritage special?
Michael’s Reply: Purchased 2007 Heritage Special, August 2012 with 10,477 miles on it. The problem randomly while riding the 6th gear indicator will go out, the speedometer drops to “0”, odometer stays on but stops recording mileage, no codes are displayed.
What happens when the 6th gear indicator goes out on a Harley?
Problem randomly while riding the 6th gear indicator will go out, the speedometer drops to “0”, odometer stays on but stops recording mileage, no codes are displayed. Not aware of lights on or off haven’t rode at night when it happens. I’ll come to a stop cycle the ignition, re-start and everything will return to normal.