How do you remove a fork tube from a Harley Davidson?
Help. Have your second set of hands hold the front end, full left, or full right (depending on which one of the Harley front forks you are working on) and hold the fork that is being removed. Evenly, loosen the three pinch bolts and slide the fork tube down and out of the trees.
How hard is it to replace fork seals on a motorcycle?
Fortunately, fork-seal replacement is generally uncomplicated. As always, the task is easier if you get your tools and supplies ready. You’ll need whatever tools are necessary to remove the fork tubes from the bike, plus a hex socket to fit the socket-head bolt securing damping rod or cartridge.
How long does it take to replace a fork tube?
If you have the right tools, and the parts are in good condition, it should take no more than 2 hours. Patience is the key to have a clean fork tube before reinstallation.
What should I do if my fork has a hole in it?
Clean the fork leg and inspect it for damage. Wipe both halves of the tube thoroughly with a microfiber cloth to remove dirt, debris, and lingering traces of oil. If you come across any burs or nicks on the surface of either half of the tube, go over them with a sheet of 600-grit wet/dry sandpaper to smooth them out.
When do you need to replace a fork seal?
Each tube requires a seal to keep the oil of the interior of the tube from leaking out. Fork seals should be replaced as soon as leaking oil is noticed. If the seal is left unchanged, the oil could leak onto the brake pads and ruin your motorcycle or you could run out of oil completely and ruin your motorcycle.
What does the fork do on a motorcycle?
The 2-pronged part of a motorcycle that connects the frame to the front wheel is known as a fork. The fork plays a critical role in steering, suspension, and braking. The fork itself consists of 2 “legs,” or tubes, each of which is fitted with a special seal that keeps the lubricating oil in the interior from escaping.