What happens when you change the brake light?
When you replace the brake light bulb on your Santa Fe Sport, be careful not to touch the bulb directly with your fingers – the oil from your skin will cause the area that you touched to burn hotter than the rest of the bulb, which causes the bulb to burn out quicker.
How do you remove a brake light bulb?
The bulb socket has a release tab; turn counterclockwise to remove. To remove the brake light bulb make sure the lights are off and the bulb is cool to the touch. Pull the brake light bulb out of the socket.
How to change the brake light on a Hyundai Santa Fe?
Brake Light Change 2013-2018 Hyundai Santa Fe Sport 1 Getting Started – Prepare for the repair 2 Remove Bulb – Steps to remove a burnt out brake light bulb 3 Helpful Hints – How to find replacement bulb type and other hints 4 Replace Bulb – Procedures to replace the new bulb 5 More Info. – Additional information on changing brake lights
How to upgrade your brake lights to led?
As you can see the is an increase in brightness on both the parking light and brake light modes, the light emitted from the LED is much cleaner, there is a crisp transition between the parking and brake lights, and the LED illuminates much quicker. Install the light socket back into the tail light housing.
How much does it cost to replace brake light?
On Amazon.com, for example, the average brake light bulb can cost anywhere from $8 to $17 , while at AutoZone.com, you can find some bulbs for as little as $5. To do it yourself, the costs can almost always be less than $20. According to 2CarPros.com, the average bulb at your local repair shop can cost anywhere from $35 to $55 .
How do you replace brake light bulb?
How to replace brake light bulb: 1. To access outer brake light bulb, rear light assembly has to be removed. 2. Lift the trunk lid, loosen screw (1) and remove the cover: 3. After the cover has been removed, loosen two nuts (1) and (2): 4. Now detach rear light assembly from the body by pulling it out: 5. Unplug the wiring from the bulb holder.
How do you replace a light bulb?
Replacing a Basic Light Bulb Take the bulb out of the socket. If the fixture is easy to reach, such as a lamp, the process is pretty straightforward. Put a new bulb in the socket. In order to put a new bulb into a lighting fixture’s socket, you will want to turn the bulb in a clockwise direction.
How do you replace tail light bulb?
Step 1: Open the lift gate. Step 2: Remove the two 10mm bolts. Step 3: Pop the tail light free from the pins on the side. Step 4: Disconnect the tail light electrical connector. Step 5: Remove the light bulb fixture assembly. Step 6: Replace the bulbs. Step 7: Reinstall the bulb assembly into the tail light.