How often do you change the timing on a Harley Davidson?
Checking the timing on your Harley-Davidson motorcycle every 5,000 miles plays an important role in a comprehensive maintenance routine. As a Harley-Davidson engine ages, you must adjust the ignition timing to compensate for the wear of internal engine parts.
How do you time a Harley Davidson engine?
Point the timing light into the timing inspection hole. If the ignition is properly timed, the timing bar will align with the circular timing reference mark. The reference marks on a correctly timed engine will appear as a vertical bar through the center of the circle.
Where is the thread timing mark on a Harley Davidson?
Thread TIMING MARK VIEW PLUG (Part No. HD 96295-65D) into timing inspection hole. Be sure view plug does not touch flywheel. 1a. See Figure 1. Locate the proper timing marks for your engine.
How to check ignition timing on a Harley Davidson?
At every 5000 mile (8000 km) service interval. Check for proper RPM and ignition timing as follows: 1. See Figure 0. Thread TIMING MARK VIEW PLUG (Part No. HD 96295-65D) into timing inspection hole. Be sure view plug does not touch flywheel. 1a. See Figure 1. Locate the proper timing marks for your engine.
Why do you need a performance camshaft on a Harley Davidson?
Keep in mind that performance camshafts are usually chosen for the basic purpose of producing more power from your engine. The three questions to answer before choosing a new cam for your Harley Davidson® motorcycle are: 1.
How do you change the timing on a Harley Davidson?
Loosen the the timing plate screws with a slotted screwdriver, and turn the timing plate to adjust the timing. Recheck the timing marks with the timing light. Tighten the timing plate screws, and install the cover. Shut off the engine, and remove the timing light.
What’s the timing range on a Harley Davidson Sportster?
Sportster: Timing Range: 0-35 : 0-45: Timing at Start: 5 : Timing at adjust RPM: 35 : Adjust RPM: 1500: 1650-1950
What’s the idle speed on a California Harley Davidson?
On California models, idle speed is 1150-1250 RPM. 5. Timing light will flash each time ignition spark occurs. Aim timing light into timing inspection hole. Front cylinder advance timing mark should be centered in timing inspection hole. If not, see ADJUSTMENT below. 6.
How do you timing a Harley Davidson Sportster?
After reading the OE manual from Harley its a bit confusing, by placing the front cams in and making sure they are timed to each other then with the rear intake cam out align the pinion gear to the rear intake and then make sure that the marks on the intake gear are aligned with the rear exhaust cam and then to the paired front cams, Loading…
Point the timing light into the timing inspection hole. If the ignition is properly timed, the timing bar will align with the circular timing reference mark. The reference marks on a correctly timed engine will appear as a vertical bar through the center of the circle.
At every 5000 mile (8000 km) service interval. Check for proper RPM and ignition timing as follows: 1. See Figure 0. Thread TIMING MARK VIEW PLUG (Part No. HD 96295-65D) into timing inspection hole. Be sure view plug does not touch flywheel. 1a. See Figure 1. Locate the proper timing marks for your engine.
Thread TIMING MARK VIEW PLUG (Part No. HD 96295-65D) into timing inspection hole. Be sure view plug does not touch flywheel. 1a. See Figure 1. Locate the proper timing marks for your engine.