How do you check your Harley Davidson radio?
Press & hold two soft keys (any two buttons 1 thru 6). Keep holding the two down while switching on the ignition switch. Keep pressing the two until the radio completes a diagnostic check. Anything shorted to B+, or ground will be reported in the display. http://www.fixmyhog.com/post/videos-harley/
What causes radio static on a Harley Davidson?
Aftermarket LED headlights will often cause excessive radio static; dont know if that is a possibility, https://www.fixmyhog.com/post/harley-radio-upgrade/ Reply Ray December 13th, 2016
What kind of headset does a Harley Davidson use?
Audio Full Helmet Premium Music and Communications Headset Boom! Audio 10S Bluetooth Helmet Single Headset Boom! Audio 30K Bluetooth Helmet Single Headset Boom! Audio 20S Bluetooth Helmet Dual Headset Pack Boom! Audio 10S Bluetooth Helmet Dual Headset Pack Boom! Audio Half Helmet Music and Communications Headset Boom!
Why is the radio not working on my Street Glide?
I replaced the battery on my wife’s 2010 Street Glide. Now the radio won’t come on. Any suggestions would be appreciated. A: If you have no power to your radio, check for a blown fuse 1st.
How to check radio diagnostics on Harley Davidson?
Press the eject button to remove any CD in the unit. the ignition switch ON. Once the H-D logo is displayed, the system automatically performs a complete switch check, scans for current DTCs, and then displays the radio diagnostic display. Release the softkeys only after the radio diagnostic display appears.
How does the radio work on a Harley Davidson?
The head phones connected to the bikes tank plug or passenger head set plug always work. When the speakers do come on they may stay on for 10 minutes to hours to 30 seconds and then a loud POP and speakers are off but radio power and station readout are still on.
What happens when you remove the factory speakers on a Harley Davidson?
When you remove the factory speakers and instead feed the radio output to an aftermarket amplifier or sound processor, the radio has no load and the output becomes unbalanced. A special resistive load needs to go between the radio and the next device (amplifier or processor).
What is parametric EQ on a Harley Davidson DSR1?
The radical 23 db swings in frequency is far too much for most any processor to deal with, but the engineers at Rockford Fosgate had the foresight to put an unusually capable parametric EQ feature in the DSR1. Does away with the need for a radio flash for most all bikes that shipped with 2 speakers and no Harley amplifier.